Philips V26CT, V24CT Rack Type Mounting Comments, CMS Patient Monitoring System, Rack can be used

The CMS and V24 and V26 Patient Monitors

Parameter Modules

Parameter modules can be plugged into the following types of rack:

Rack Type	Mounting	Comments
CMS Patient Monitoring System
Integral Rack	This is fitted to the front of	Cannot be used with
	the M1046A computer	the M1167/77A CMS
	module.	Patient Monitoring
		System. 8-slot rack.
Satellite Rack	You can have one or more	Can be used with all
	satellite racks attached to	CMS Patient
	an I.V. pole, bedside or	Monitoring System.
	wall.	Available as 6-slot or
		8-slot rack.
V24 and V26 Patient Monitor
8-slot Satellite	Same as Satellite Rack for	Only one Satellite
Rack	CMS.	Rack can be used
(Standard)		with a V24 and V26
		Patient Monitor.
6-slot Satellite	Same as Satellite Rack for
Rack	CMS.
(Optional)	This can also be mounted
	to the back of the M1205A
	V24CT and V26CT
	Monitors

C aution

When the rack is mounted in close proximity to any intravenous infusion equipment, do not let saline solution get onto the rack or parameter modules. Severe damage to the equipment can result if saline solution leaks into the connectors at the rear of the modules.

You can plug the parameter modules into the rack and remove them as you require them. The number of modules you can plug in depends on the type of rack and the model of monitor you have ordered.

1-18 The CMS and V24 and V26 Patient Monitors