Philips V24CT, V26CT manual Changing Operating Modes

Changing Operating Modes

Changing Operating Modes

This function will be mainly used by service engineers for configuring the system on installation or for servicing the system. Before you can operate in this Task Window you have to use a password.

There are three levels of password:

Level 1 password Level 2 password Level 3 password

allows you to select Monitor or Config mode only.

allows you to select Monitor or Service mode only.

allows you to select any of the four operating modes listed below:

Monitor This is the usual operating mode and fully supports patient monitoring. If the system is attached to a patient it must be in this mode.

Config This mode is for configuring the monitor, for example, on installation. The settings that are selected in this mode will be the active default settings for when the system is turned on.

Service This mode is used by service personnel.

Demo This mode can be used for training purposes. The data base has 24 hrs of simulated waveform and trend data.

Warning

The Configuration, Service and Demo modes do not support patient monitoring. When the monitor is attached to a patient it must be in the monitor mode.

Setting up your Monitor

Setting up your Monitor 3-55