Philips V26CT, V24CT manual Episode, Jumps from one oxyCRG episode to the next in both directions

Event Review

Neonatal Event Review

Viewing oxyCRG Episodes

The exact time an event was triggered is indicated by a vertical line which is positioned on the graph according to the monitor's configuration. Depending upon the user's requirements, the monitor can be configured (in Configuration Mode) to display and store an oxyCRG Episode in the following way:

•Two minutes of Pre-Event Time / Two minutes of Post-Event Time (the default) or

•One minute of Pre-Event Time / Three minutes of Post-Event Time

Note—In both cases manual events are displayed with four minutes Pre- Event Time.

The association of events is determined by the configuration of the post event time. The events that occur during the configured two or three minutes of post event time are associated and displayed as one event in the Event Review and oxyCRG Episode Task Window.

Operating In the oxyCRG task window you can:

Controls

1.Select the previous episode.

2.Select the next episode.

3.Return to the Event Review task window.

4.Record an episode.

5.Print an episode.

6.Delete an event.

Selecting an	Selecting the	Previous Episode	and/or	Next Episode	softkeys
Episode	jumps from one oxyCRG episode to the next in both directions.

Entering the Selecting the softkey returns you to the Event Review Event Review task window. The event last selected in the oxyCRG Episode task Task Window window will be selected here.

9-16 Neonatal Event Review