Samsung FCQ321HTUX How to set the oven for self-cleaning, How to delay the start of self-cleaning

Models: FCQ321HTUX FCQ321HTUB FCQ321HTUW

1 92
Download 92 pages 1.13 Kb
Page 29
Image 29
How to set the oven for self-cleaning

How to set the oven for self-cleaning

1. Select the length of time for the self-cleaning operation, eg. 3 hours.

Press the SELF CLEAN pad once for a 3 hour clean time, twice for a 4 hour clean time, or 3 times for a 2 hour clean time.

The default setting is 3 hours. 2. Start the self-cleaning cycle.

Press the SET/START pad. The motor-driven door lock will engage automatically.

You will not be able to start a self-cleaning cycle if the control lockout feature is activated or if the oven’s temperature is too hot.

The oven door locks automatically. The display will show the clean time remaining. It is not be possible to open the oven door until the temperature drops to a safe/cool temperature.

The self-cleaning feature will not operate when a surface element is on. If a surface element gets turned on during a self-cleaning cycle, the cycle will turn off automatically.

How to delay the start of self-cleaning

1. Press the SELF CLEAN pad.

Select the desired self-clean time by pressing SELF CLEAN pad. 2. Press the DELAy START pad.

. Using the CLOCK and number pads, enter the time you want the clean cycle to start.

. Press the SET/START pad.

The display will show Delay start time and Lock icon. And the motor-driven door lock will engage automatically.

5. Self-Cleaning cycle will turn on automatically at the set time.

How to turn off the self-cleaning feature

You may fi nd it necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fi re in the oven. (When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times.)

1. Press the CLEAR/OFF pad.

2. You will be able to open the oven door once the oven has cooled down for approximately 1 hour.

After a self-cleaning cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. (If white spots remain, remove them with a soap-fi lled steel wool pad and rinse thoroughly with a vinegar and water mixture.)

If the oven is not clean after one cycle, repeat the cycle.

You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

05 MAINTAINING YOUR APPLIANCEHow to delay the start of self-cleaning

Maintaining your appliance _29

Page 29
Image 29
Samsung FCQ321HTUX, FCQ321HTUW, FCQ321HTUB How to set the oven for self-cleaning, How to delay the start of self-cleaning