Philips manual Information V26CT Battery V24CT

Battery Charged

Battery Charging

AC and DC (Battery) Operation

•The lead-acid batteries need not be fully discharged prior to charging. Unlike Ni-Cad batteries, lead-acid battery capacity is not affected by depth of discharge.

Note—If you insert only one battery into the monitor for charging, the LED will flash continuously. The

LED will not light even when the one battery is fully charged. This is to remind you that both batteries are not fully charged. The one battery will provide enough power to run the monitor. However, the operating time with one charged battery is less than half the operating time with two charged batteries.

Note—When the unit is not being used for transport, connect it to AC power with the monitor turned off. This maintains a full battery charge and prolongs battery life.

Note—In the event of AC power failure, the instrument’s battery is automatically activated so that no data or product information is lost.

Information	and V26CT
Battery	(V24CT

Battery Information (V24CT and V26CT only) 12-5