Philips V26CT, V24CT manual Pressing, Stores the resampled values at the current time

Trends and Calculations

Performing and Reviewing Calculations

Resampling Resampling of vital signs enables you to override the values in the Vital SIgns Trends database, which are stored every 12 seconds or averaged over 1

minute, depending on the monitor’s configuration. Resampling enables you to use the most recent continuously monitored values. Resampling sets the calculation time to the current time, and displays the corresponding values for the previous second in the calculations task window. Resampled values are indicated by a preceding asterisk (*) in Calculations, Graph Trends, and Vital Signs task windows.

If no current values exist, then the most recent value within 30 minutes will be retrieved. The most recent height, weight, (and head circumference for neonatal only) are used regardless of how long ago they were entered.

Pressing	Confirm	stores the resampled values at the current time.
Pressing			also stores the resampled values at the current
	Perform Calc

time and does the calculations using the resampled values. Pressing any other softkey except On/Off DataTime cancels the resampled values and brings up the database values for the displayed calculation time.

Resampled values that are not stored or used in calculations will be erased.

When data is transferred with the Data Transfer module, values that have been resampled are transferred to the destination monitor. Resampled and other manually entered data is annotated with an asterisk (*) at the destination monitor if both the source and destination monitors have software at the Release F level or higher (CMS) or Release A.0 level or higher (V24 and V26).

8-24 Trends and Calculations