Philips V26CT, V24CT manual Recorder stripes

Recording Functions

Loading Paper

Cleaning the If very slow speed (1 or 2 cm/min) recordings are run for extended

Print head in periods of time, deposits of paper debris may collect on the print head.

the Plug-InSymptoms of this are recordings that are unevenly fainter in horizontal

Recorder stripes.

To clean the print head, remove the recorder from the rack. Open the recorder door and un-thread the paper from behind the rubber roller. Tear off or roll up the excess paper into the roll chamber to be out of the way. Thread the cloth cleaning strip instead of paper around the rubber roller until the leader exits from the top of the roller by about 2 inches.

Close the recorder door, with both ends of the strip aligned over the top of the door. Grasp the top end of the cleaning strip between thumb and forefinger, and pull the strip through and out of the recorder.

Open the door and ensure that the paper cavity is free of dust. Re-thread the paper and plug the recorder back into the rack.

C aution

When the Plug-In recorder is disabled (by removal from the rack, door open, or out of paper), any alarm recordings will be run or queued at the central station recorder, if there is one. Otherwise alarm recordings will be lost during the time the Plug-In recorder is disabled, and an alerting

6-52 Recording Functions