Philips V24CT, V26CT manual Battery, Specifications, Volt

V26CT/V24CT Power Supply

Battery life includes the time during the low battery alarm (INOP “Recharge Batteries”) until the unit shuts off.

We recommend you use 2 fully charged batteries to get the optimum battery life when using the battery power supply.

Battery	•	1 or 2 lead-acid batteries.
Specifications	•	12 Volt.

• Up to 1.25 hours battery capacity typical on two new fully charged batteries at 25°C, depending on modules used in the product.

Note—Charging time is 4 hours to 90% of full capacity if the monitor is off. 16 hours to 90% of full capacity if the monitor is on.

The CMS and V24 and V26 Patient Monitors

			Confirm
Trends/	Module
Calc	Setup
Delayed
Record	Battery	Battery	AC
	Charging	Charged	Power

Note—When AC is connected and the monitor is on, the Battery Charge LEDs may take some time to cycle to the appropriate charge indication and may underreport battery capacity during this setting period. Use the fuel gauge rather than the Battery Charge LEDs during this period to estimate battery capacity or turn the monitor off to accelerate the charge setting time.

See Chapter 12, “Battery Information (V24CT and V26CT only)” for additional information on battery operation and Battery Charge LEDs and indicators.

The CMS and V24 and V26 Patient Monitors 1-15