Philips V24CT, V26CT manual Rear Panel Display Modules

The Rear

Panel of the

Display

Modules

Controls and Connectors	InstallationMonitor	SafetyPatientand
(or receive inputs from the Ohmeda 7800/7810 Ventilator or the
Anesthetic Gas Module).

Warning

Make sure all devices connected to the RS232 connectors are isolated. Consult your biomedical engineer, who will verify this for you.

8.HDLC Connector; this is used to connect to a STRIP recorder (such as the Philips M1117A).

9.Video Out Connector (CDSPC-Video or DSPC); this is a connector used to output information to be displayed on the display module.

10.PS ON/OFF connector (DSPC_FLAT); this is left open.

11.Video Out Connector (Flatscreen); this is a connector used to output information to be displayed on the Flatscreen Display Module and also to output 60V DC to the Flatscreen Display Module.

The system can have one of the following displays:

•the M1092A Monochrome display

•the M1094A Color display

•the M1094B Color display

•the M1095A Flatscreen Color display

The rear panel of each display module is shown below. The back of the display module should only be removed by qualified service personnel

Monitor Installation and Patient Safety 11-23