The Belt

When to Replace

Disconnect cleaner from electrical outlet before checking or replacing belt.

To check belt, remove the bottom plate (see following section).

If the belt is stretched, cut, broken, or if the agitator brushes are being replaced, replace the belt.

How to Replace

2.2

2.3

Turn cleaner over.

Release worn belt from pulley.

Remove bottom plate by releasing latches.

 

Lift out agitator, remove old belt and place new belt in groove of agitator.

Replace agitator by aligning the projection, located on one end of the agitator, with the slot in the wall of the cleaner base.

Then push the agitator down into position.

2.4

 

Place belt on pulley.

 

Side of belt nearer cleaner should be in line with

 

 

 

 

projections on bottom of cleaner.

 

 

Replace bottom plate, by putting knobs on front

 

 

of plate into wire holders on cleaner.

 

 

Check to see that latches are pushed back and will not

 

 

be covered by plate.

 

 

Position bottom plate over agitator and latch securely.

 

 

 

Belt: What to Buy

Use only genuine HOOVER belts with your cleaner.

When purchasing a new belt, ask for HOOVER part No. 44783.

6

 

.44783no Hoover pièce la demander courroie, nouvelle d’une l’achat Pour

 

.HOOVER marque de courroies des que aspirateur votre pour N’utiliser

 

 

acheter Quoi : courroie La

 

 

 

 

 

.languette la et

 

 

 

 

 

l’agitateur dessus-par inférieure plaque la placer Bien

 

 

.plaque la par couvertes pas

 

 

sont ne et repoussées sont languettes les si Vérifier

 

 

.l’appareil de conducteur‑porte

 

 

le dans plaque la de l’avant à saillants boutons

 

 

les mettant en inférieure plaque la Replacer

 

 

.l’aspirateur de bas au saillants boutons les avec aligné

 

 

être devrait l’appareil de près plus le courroie la de côté Le

 

 

 

4.2

.poulie la sur courroie la Placer

 

 

 

 

 

 

 

 

.bas le vers l’agitateur pousser Puis

 

 

.l’aspirateur de base la de paroi la dans

fente la avec l’agitateur, de extrémité une à situé saillant, bouton le alignant en l’agitateur Replacer

.l’agitateur de rainure la dans courroie nouvelle la placer et courroie l’ancienne retirer l’agitateur, Soulever

 

 

 

 

 

.libération

 

 

de verrous des par inférieure plaque la Retirer

.poulie la de usée ceinture la Libérez

.l’envers à l’aspirateur Tourner

 

 

 

 

 

 

3.2

 

 

2.2

 

 

 

Remplacement

 

 

 

.courroie la aussi

remplacer remplacé, est agitateur brosse-rouleau le si ou sectionnée, ou coupée étirée, est courroie la Si

.suivante) section la (voir inférieure plaque la retirer courroie, la vérifier Pour

.courroie la remplacer de ou vérifier de avant l’appareil Débrancher

 

 

 

remplacer Quand

 

 

 

courroie La

6

Page 6
Image 6
Hoover C1431010 owner manual Courroie La, When to Replace, Belt What to Buy

C1431010 specifications

The Hoover C1431010 is an innovative and versatile vacuum cleaner designed to meet the needs of modern households. With its user-friendly features and advanced technologies, this model stands out in the market for its efficiency and performance.

One of the main features of the Hoover C1431010 is its lightweight and compact design, making it easy to maneuver around the house. Weighing in at just a few pounds, it allows for effortless transportation from room to room, as well as easy storage in small spaces. This vacuum is designed with convenience in mind, making it ideal for individuals who may struggle with heavier models.

The C1431010 is equipped with a powerful motor that delivers strong suction capabilities, ensuring that even the smallest dust particles and debris are effectively captured. This makes it particularly suited for homes with pets or children, where messes can quickly accumulate. The vacuum also features multi-surface cleaning capabilities, allowing it to transition seamlessly between carpets, hardwood floors, and tile surfaces without losing effectiveness.

Another key characteristic of the Hoover C1431010 is its advanced filter system. It is designed with a HEPA filter that traps allergens and dust, making it an excellent choice for allergy sufferers. This filter can be easily removed and cleaned, ensuring that the vacuum maintains optimal performance while reducing maintenance efforts.

The C1431010 also includes a variety of attachments to enhance its cleaning capabilities. With tools such as the crevice tool and dusting brush, users can tackle hard-to-reach areas and delicate surfaces with ease. These accessories enhance the vacuum's versatility, making it suitable for a wide range of cleaning tasks around the home.

In addition to its performance features, the Hoover C1431010 boasts an ergonomic design that prioritizes user comfort. The vacuum handle is designed for a comfortable grip, reducing strain during extended cleaning sessions. This thoughtful design element enhances the overall experience, making vacuuming less of a chore and more of a streamlined task.

Overall, the Hoover C1431010 combines powerful performance, versatile cleaning options, and user-friendly features in a compact package. With its HEPA filtration, multi-surface capabilities, and lightweight design, it stands out as a reliable choice for anyone looking to maintain a clean and healthy living environment.