Philips V26CT, V24CT At calculation time, Indicator of time change, When the transfer is finished

Vital Signs, Blood Review and Graphs

The destination monitor creates the time stamp for transferred data by determining how old each data sample is and subtracting the age of the data from the current monitor time.

C aution

	Hemodynamic, oxygenation, and ventilation calculations result values
	may show slightly different times before and after being transferred,
	because a different set of valid parameters was used for the calculation
	at calculation time.
	If there is a time change at the destination monitor for data occurring
	after the transferred data, the “T” will not be overwritten by a “?”, the
	indicator of time change.
Reports	Although transfers to the module and report printing can occur
	simultaneously, data cannot be transferred to the monitor during the
	printing of reports. If a transfer to the monitor is initiated during
	printing, the printing can be suspended for the duration of the transfer
	through the Data Transfer Task Window; it will continue automatically
	when the transfer is finished.

Data Transfer

10-18 Data Transfer