Philips V26CT, V24CT manual → On/Off Setup

Module Setup

Setting up your Monitor

Other Functions You Can Configure

4. Press Main Screen to return to the Main Screen.

You can also switch OFF parameters in the following ways:

•Any parameter: unplug the module, and suspend or silence the alarms.

•Any parameter except ECG, RESP or NBP: disconnect the transducer or adapter cable from the module, and suspend or silence the alarms.

If you switch off a parameter, you can ONLY enter the parameter's Setup Task Window (via the module's hardkey) by first pressing

→ On/Off Setup .

When you plug in a parameter module and connect the transducer or adapter cable, the parameter is automatically switched on. (ECG, RESP and NBP are automatically switched on when you plug in the relevant module.)

3-34 Setting up your Monitor