Philips V24CT Cleaning the Roller on the Four Channel M1117A Recorder, Step, Equipment, Required

Loading Paper

Cleaning the Roller on the Four Channel (M1117A) Recorder

Step 3	Close the door. The paper should feed
	automatically.

Note—The first sheet will come out folded, as shown.

If the paper doesn’t move through the roller properly, a possible cause is that the roller needs to be cleaned. (Be sure your hands are clean before touching the roller).

Equipment	•	Lint-freecloths or wipes
Required	•	Alcohol solvent that is low in water content. We recommend either
		reagent grade denaturated ethanol or isopropanol (90% rather than
		70%)

Directions 1. Turn the power off.

2.Open the door and remove any paper from the recorder.

3.Wipe the visible part of the roller with a saturated (but not dripping) cloth. Rotate the roller with clean fingertips to expose the entire surface and wipe the other side.

4.Remove any excess liquid by wiping with a dry cloth.

C aution

The roller must be completely dry before using the recorder or you can permanently damage the recording mechanism.

Recording Functions 6-55