Jwin JX-CD573 instruction manual AC Operation, Battery Operation

Portable MP3 CD Radio Cassette Recorder V10M10_IM_EN_11152007

GETTING STARTED

Location of Controls-continued

4 3 2 1 8 7 6 3

28	29	22	30	31
1. VOLUME CONTROL			17. CASSETTE RECORD BUTTON
2. HEADPHONE JACK			18. CD DOOR RELEASE
3. HANDLE			19. CD PLAY/PAUSE BUTTON
4. FM ANTENNA			20. CD STOP BUTTON
5. CD COVER			21. CD SKIP FORWARD/BACKWARD
6. ANALOG RADIO FREQUENCY READER			22. STEREO SPEAKERS
7. TUNING KNOB			23. LCD SCREEN
8. AUX JACK			24. USB CONNECTION
9. +10/ALBUM USB/SD BUTTON			25. CASSETTE DOOR
10. MODE BUTTON			26. SD/MMC CARD SLOT
11. PROG/EQ BUTTON			27. BUILT-IN MICROPHONE
12. CASSETTE PAUSE BUTTON			28. AC CONNECTION
13. CASSETTE STOP/EJECT BUTTON			29. USB/SD-RADIO-TAPE/OFF-
14 CASSETTE F.FWD BUTTON			CD/MP3/AUX
15. CASSETTE REWIND BUTTON			30. FM-ST./FM/AM SWITCH
16. CASSETTE PLAY BUTTON			31. BATTERY COMPARTMENT

AC Operation

Before operating the JX-CD573, make sure that the voltage on the unit corresponds to the voltage of your local area. Unravel the AC Line Cord; insert one end into an AC socket on the unit and the other end into a standard AC outlet.

1.In case of malfunction due to electrostatic discharge (ESD), reset the unit by reconnecting the AC cord again to resume to normal operation.

2.When not in use, unplug the AC power cord from the AC power socket.

Battery Operation

Disconnect the AC Cord. Open the BATTERY COMPARTMENT and insert 2/UM-“C” size x 8 batteries (not included) making sure that the battery polarity (+/-) is observed.

Remove the batteries if the unit will not be used for a long period of time.

- 7 -www.jWIN.com