Panasonic AW-HS50N Other settings, 13Operation Menu 5.BUS Mode, 13Operation Menu 8.GPI Input

6. System settings

6-2-2. Other settings

[13]Operation Menu

4.Key Priority

￿For details, refer to “3-3. KEY”.

[13]Operation Menu

5.BUS Mode

￿For details, refer to “3-1-4. Selecting the bus mode”.

[13]Operation Menu

6.Time Unit

￿For details, refer to “3-1-7. Auto transition”.

[13]Operation Menu

7.Slide Lever

￿For details, refer to “3-1-6. Manual transitions”.

[13]Operation Menu

8.GPI Input

This is used to enable or disable control from the GPI input port.

Enable: Control is enabled.

Disable: Control is disabled.

￿For details on what is controlled, refer to “7-2. TALLY/ GPI”.

[13]Operation Menu

9.GPI Output

This is used to enable or disable control from the GPI output port.

Enable: Control is enabled.

Disable: Control is disabled.

￿For details on what is controlled, refer to “7-2. TALLY/ GPI”.

[13]Operation Menu

10.CamCont Link

This is used to set linked control with the AW-RP50 to ON or OFF.

On: Link control is set to ON.

Off: Link control is set to OFF.

￿For details on what is controlled, refer to “??? Function for linking up with the remote camera controller ???”.

[13]Operation Menu

11.FAN

This displays “Alarm” when something is wrong with the cooling fan.

[13]Operation Menu

12.Power

This displays “Alarm” when a drop in the supply voltage has been detected.

[13]Operation Menu

13.Temperature

This displays “Alarm” when the temperature inside the unit has risen.

If an alarm has occurred, stop using the unit immediately, and be sure to contact your dealer. Continuing to use the unit in this condition could damage it.

[13]Operation Menu

14.SYSTEM Menu

When “Locked” is selected as this item’s setting, it is not possible to change the [14] SYSTEM Menu settings. Select this setting when it is not desirable for the [14] SYSTEM Menu settings to be changed easily.

66