Panasonic AW-HS50N POWER indicator Power LINK indicator Link,  Alarm indicator Alarm

1. Parts and their functions

1-1. Control panel

			Compact Live Switcher AW-HS50
POWER		ALARM		LINK		USER 1 3		USER 2 4
AUX		PinP		KEY-F/S		MIX		WIPE
	BUS DELEGATION					TRANSITION TYPE
KEY-S
AUX
PGM		PVW		KEY OUT		CLN		MV
1	6	2	7	3	8	4	9	5 10

KEY-F

PinP

AUX

SHIFT	OSD/TIME	OSD ON
PinP ON	KEY ON	FTB ON

A

SHIFT

CUT

B

SHIFT

AUTO

BKGD

POWER indicator [POWER] LINK indicator [LINK]

This indicator lights when the POWER switch

() on the rear panel is set to ON while power is supplied to the DC IN connector ().

This indicator lights when the unit is linked on a network with the AW-RP50 remote camera controller available as an option.

The link setting must be enabled at both the unit and AW-HS50.

ALARM indicator [ALARM]

This indicator lights when the cooling fan () has stopped running, when there is a problem with the power supply (voltage drop) or when the temperature inside the unit has reached an abnormally high level.

When this occurs, an alarm message appears on the OSD menu while the OSD menu is displayed on

an external monitor (in the OSD ON status).

The alarm information can be output to an external device from the unit’s TALLY/GPI connector ().

Refer to “5-2. TALLY/GPI” (<Operations and Settings> Operating Instructions).

When an alarm has occurred, stop using the unit immediately, and be absolutely sure to contact your dealer.

Continuing to use the unit even after an alarm has occurred could damage the unit.

11