Panasonic AW-HS50N Display of camera information, Transmission of tally information

Characteristics

Function for linkup with a camera integrated with a pan-tilt head and remote camera controller using IP connection

￿￿The unit can be connected to a Panasonic camera with an integrated pan-tilt head and a remote camera controller using a network.

By linking it with a remote camera controller, it is possible to put together a highly efficient operating environment.

Supported camera integrated with a pan-tilt head: AW-HE50

Supported remote camera controller: AW-RP50

Only one switcher (the unit) can be linked with a remote camera controller.

[Display of camera information]

The camera setting information (iris, gain and so on) obtained by the AW-RP50 can be displayed in the AUX output or on the split screens of multi view display.

[Transmission of tally information]

The unit’s ON AIR tally information can be sent to the AW-RP50.

[Switching of materials]

The bus materials of the switcher (the unit) can be selected from the AW-RP50.

They can be switched in tandem with the selection of the camera using the AW-RP50.

(Control buses supported: AUX, PVW, PinP, KEY-F)

[Focus assist function]

By operating the buttons on the AW-RP50, it is possible to switch to the multi view display screen from the full screen display of the camera images.

(Control bus supported: AUX)

[Control using PAN/TILT lever and ZOOM button]

The PAN/TILT lever and ZOOM button on the AW-RP50 can be used to change the parameters of the switcher (the unit).

8