Panasonic AW-HS50N Setting the video process function, Setting the up-converter

4. Input/output signal settings

4-1-5. Freezing and canceling the freezing of the input images

[10.1] Input Menu/SDI-IN1

3. Freeze

[10.2] Input Menu/SDI-IN2

3. Freeze

[10.3] Input Menu/SDI-IN3

3. Freeze

[10.4] Input Menu/SDI-IN4

3. Freeze

[10.5] Input Menu/DVI-IN

1. Freeze

These are used to freeze the SDI input signal images or cancel the freezing of these images.

On: The images are frozen.

Off: The image freezing is canceled.

￿When the multi view display is used to show the input signals of frozen images, the “F” mark appears in front of the material names.

4-1-6. Setting the video process function

The video process function works for all the SDI input signal images.

The color tones can be changed on an image by image basis.

The “VPrc/YGain/Ped” and “VPrc:CGain/Hue” items are used to change them.

VPrc/YGain/Ped	VPrc	This is used to enable or disable the
		video process function.
		On: Function enabled
		Off: Function disabled
	YGain	This is used to set the gain of the Y
		signal.
		0.0 to 200.0
	Ped	This is used to set the pedestal level
		value.
		–20.0 to 20.0
VPrc:CGain/Hue	CGain	This is used to set the gain value of the
		saturation.
		0.0 to 200.0
	Hue	This is used to set the amount of change
		in the hue.
		0.0 to 359.9

4-1-7. Setting the up-converter

This unit features an up-converter function.

The up-converter is set on the SDI-IN3 and SDI-IN4 menus.

[10.3] Input Menu/SDI-IN3

8. UC:Scale/ECPos

[10.4] Input Menu/SDI-IN4

8. UC:Scale/ECPos

Scale: “SQ,” “EC” or “LB” is set as the scaling method.

Input image	SQ	EC	LB
SQ	The image is enlarged both horizontally and
(squeeze)	vertically to fill the entire screen.
EC	The aspect ratio of the image is maintained,
(edge crop)	the image size is increased in accordance with
	the vertical resolution, and black bands are
	added at the left and right.
LB	The aspect ratio of the image is maintained,
(letter box)	the image size is increased in accordance
	with the horizontal resolution, and the image is
	cropped at the top and bottom.

ECPos: The image position is finely adjusted.

This can be set only when “EC” (edge crop) has been selected as the Scale setting.

Center	The image is positioned in the center, and black
	images are added at the left and right.
Right	The image is positioned at the right, and a black
	image is added at the left.
Left	The image is positioned at the left, and a black
	image is added at the right.

[10.3] Input Menu/SDI-IN3

9. UC:Size

[10.4] Input Menu/SDI-IN4

9. UC:Size

The size of the up-converted input image is adjusted using a percentage from 0 % to 10 %.

52