Panasonic AW-HS50N Parts and their functions, Control panel, POWER indicator POWER

1. Parts and their functions

1-1. Control panel

￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿ ￿

Compact Live Switcher AW-HS50

POWER ALARM LINK USER 1 3 USER 2 4

￿

SHIFT OSD/TIME OSD ON

￿￿

￿

AUX	PinP	KEY-F/S	MIX	WIPE	PinP ON KEY ON FTB ON
	BUS DELEGATION		TRANSITION TYPE

	KEY-S								A
￿	AUX								SHIFT
	PGM		PVW		KEY OUT		CLN		MV
	1	6	2	7	3	8	4	9	5 10

KEY-F

￿ PinPB AUX

SHIFT

￿

CUT

￿

AUTO

BKGD

￿ ￿

￿POWER indicator [POWER]

This indicator lights when the POWER switch (￿) on the rear panel is set to ON while power is supplied to the DC IN connector (￿).

￿ALARM indicator [ALARM]

This indicator lights when the cooling fan (￿) has stopped running or when there is a problem with the power supply (voltage drop).

When this occurs, an alarm message appears on the OSD menu while the OSD menu is displayed on an

external monitor (in the OSD ON status).

The alarm information can be output to an external device from the unit’s TALLY/GPI connector (￿).

￿For details, refer to “7-2. TALLY/GPI”.

When an alarm has occurred, stop using the unit immediately, and be absolutely sure to contact your dealer.

Continuing to use the unit even after an alarm has occurred could damage the unit.

￿USER buttons [USER 1, USER 2]

Any four functions selected from among the menu items can be assigned to the USER 1 button and USER 2 button, and then used.

The functions registered in [USER1] and [USER3] are assigned to the USER 1 button whereas the functions registered in [USER2] and [USER4] are assigned to the USER 2 button.

While the SHIFT button (￿) is held down, the function registered in [USER3] or [USER4] can be selected.

Button indicator ON:

The functions assigned to the USER buttons are enabled

Button indicator OFF:

The functions assigned to the USER buttons are disabled

When “[2] WIPE Menu”, “[3] PinP Menu” or “[5] KEY Adjust Menu” is displayed on the OSD menu or when the chroma key marker is in the ON status, these buttons

function as short-cut buttons for specific setting items. ￿ For details, refer to “3-8. Setting the USER buttons”.

￿LINK indicator [LINK]

This indicator lights when the unit is linked on a network with the AW-RP50 remote camera controller available as an option.

The link setting must be enabled at both the unit and AW-HS50.

11