Panasonic AW-HS50N Supplied AC adapter, Power requirements, Current consumption, W  H  D

4. Specifications

Control I/O	LAN (RJ-45)	Connecting cable:
	10BASE-T/100BASE-TX	LAN cable (category 5 or above),
	(For IP control)	max. 100 m [328 ft.], STP (Shielded Twisted Pair)
		cable recommended
		 When connecting to a hub (switching hub), use a
		straight cable.
		Use a crossover cable when connecting the unit
		and another device on a 1:1 basis without going
		through a hub.
	TALLY/GPI	INPUT : 5 inputs, photocoupler sensing
	(D-sub 15-pin, female,	OUTPUT : 7 outputs, open collector output
	inch thread)	(negative logic)
Other	SERVICE switch [SV/NM] (for maintenance purposes)
	Normally, this switch is used as the “NM” position.
Ambient operating	0 °C to 40 °C (32 °F to 104 °F)
temperature
Humidity	10 % to 90 % (no condensation)
Power requirements	DC 12 V 10 % (AC adapter provided)
Current consumption	2.0 A (DC 12 V)
Dimensions	210  67  177 mm (8-1/4˝  2-5/8˝  6-15/16˝)
(W  H  D)	[excluding protrusions]
Mass	1.4 kg (3.08 lbs.)

Supplied AC adapter

Rated input: AC 100 V to 240 V, 1.3 A, 47 Hz to 63 Hz

Rated output: DC 12 V, 3.5 A, 42 W

The provided power cable is for 125 V AC or less.

Use it within AC 100 V to 120 V.

The AC adapter and power cable provided must be used without fail.

Mass and dimensions shown are approximate.

Specifications are subject to change without notice.

33