Panasonic AW-HS50N Selecting the key materials, Key transition, Basic operations

3. Basic operations

3-3-3. Selecting the key materials

Select the key materials using the A bus and B bus crosspoint buttons.

1Press the KEY-F/S button to set the crosspoint buttons to the key bus material selection mode.

2Select the key fill signal using the B bus crosspoint buttons.

3Select the key source signal using the A bus crosspoint buttons.

4Press the KEY-F/S button to release the bus selection mode of the crosspoint buttons.

31, 4

AUX		PinP		KEY-F/S		MIX		WIPE	PinP ON KEY ON FTB ON
		BUS DELEGATION				TRANSITION TYPE
KEY-S									A
AUX									SHIFT
PGM		PVW		KEY OUT		CLN		MV	CUT
1	6	2	7	3	8	4	9	5 10
KEY-F									B
PinP
AUX									SHIFT
									AUTO
									BKGD

2

3-3-4. Key transition

When the KEY ON button is pressed, the key transitions (fades in) for the transition duration which has been set.

<Setting the transition duration>

[1]TIME/CBGD Menu

3.KEY Time

￿￿The transition duration can also be changed by turning the OSD/TIME dial while pressing the KEY ON button. When the KEY ON button is held down, the duration setting is displayed on the OSD menu so the setting can now be changed while checking what is displayed.

The key transition can also be executed by operating the slide lever.

<Selecting the slide lever operation>

[13]Operation Menu

7.Slide Lever

33