Panasonic AW-HS50N Setting the material names, Setting the freeze method, 0COG%^, Frame

4. Input/output signal settings

4-1-3. Setting the material names

[10.1] Input Menu/SDI-IN1

5. Name

[10.2] Input Menu/SDI-IN2

5. Name

[10.3] Input Menu/SDI-IN3

5. Name

[10.4] Input Menu/SDI-IN4

5. Name

[10.5] Input Menu/DVI-IN

3. Name

These are used to set the material names.

Material names can be set when “Preset” or “User” has been selected as the material name type setting.

￿￿The material names are merely displayed (they cannot be set) when “Default” or “Cam Name” has been selected as the material name type setting.

When “Preset” is selected

The materials names are set using the “type + number” format.

Type: C, CG, CGV, CGK, PC, V, VTR, VCR

Numbers: 1 to 9

When “Preset” is selected as the material name type setting, the “Name” item will be displayed as shown below.

0COG%)^

How to set the material names:

Press the OSD/TIME dial, and move the cursor “>” to the position where the material type is to be selected.

Turn the OSD/TIME dial to select the material type, and press the OSD/TIME dial to enter the selection.

Next, the cursor “>” will move to the position where the number is to be selected. Turn the OSD/TIME dial to select the number, and press the OSD/TIME dial to enter the selection.

When “User” is selected

Any material names consisting of not more than 10 characters (alphanumerics and symbols which can be expressed in ASCII codes) can be set.

When “User” is selected as the material name type setting, the “Name” item will be displayed as shown below.

0COG#$%&^

How to set the material names:

Material names are set one character at a time.

Press the OSD/TIME dial, and move the cursor “>” to the material name position.

Turn the OSD/TIME dial to move the blinking part to the character input position, and press the OSD/TIME dial. Next, the cursor “>” will move to the position where the character is to be selected. Turn the OSD/TIME dial to select the character, and press the OSD/TIME dial to enter the selection.

4-1-4. Setting the freeze method

[10.1] Input Menu/SDI-IN1

2. Freeze Select

[10.2] Input Menu/SDI-IN2

2. Freeze Select

[10.3] Input Menu/SDI-IN3

2. Freeze Select

[10.4] Input Menu/SDI-IN4

2. Freeze Select

These are used to select the increment in which the SDI input signal images are to be frozen (turned into still images).

Frame:

The images are frozen in 1-frame increments.

Field:

The images are frozen in 1-field increments. This is used when freezing moving images.

With interlace signals, however, diagonal lines and moving parts appear jagged.

51