Setting the level meters | Panasonic AW-HS50N instruction

5. Setting the multi view display

5-4. Setting the level meters

Level meters for the embedded audio signals transferred by the SDI input can be displayed on the split screens.

Left display:

Channel 1 of group 1

Right display:

Channel 2 of group 1

[8]MultiView Out/Frame Menu

5.Level Meter

On: The level meters are displayed.

Off: The level meters are not displayed.

5-5. Setting the input signal marks

The status of the input signals can be displayed in front of the material names displayed on the split screens.

“F” mark	This appears when the input signals are
	frozen.

“ ! ” mark	This appears when there are no input
	signals.

“C” mark	This appears when the signals from
	a remote camera controlled by the
	AW-RP50 are input.

[8]MultiView Out/Frame Menu

6.Input Status

On: The input signal status is displayed.

Off: The input signal status is not displayed.

Page 61

Image 61

Panasonic AW-HS50N operating instructions Setting the level meters, Setting the input signal marks

Contents

Operating Instructions FCC Note Safety precautions Important Safety Instructions Contents Setting the multi view display Input/output signal settingsSystem settings External device control interfaces Overview Before use Characteristics Control using PAN/TILT lever and Zoom button Switching of materialsDisplay of camera information Transmission of tally information Required personal computer environment Accessories Operating precautions Control panel Parts and their functions OSD/TIME dial OSD/TIME Shift button ShiftOSD on button OSD on PinP on button PinP on Auto button Auto Bus tally indicators A, BSlide lever MIX button MIX Bus crosspoint buttons 1 to While the indicator of the KEY-F/S button is lightedMemo SDI OUT connectors SDI OUT 1 Power switch PowerSDI in connectors SDI in 1 to DVI in connector DVI LAN connector LAN RJ-45 10BASE-T/100BASE-TX DVI OUT connector DVI OUTCooling fan DC in connector 12V in DC 12V, 2.5A Ground terminal Signal GND Preparations Installation precautions Connections with other devices Block diagram AW-HS50 Example of connections Compact Live SwitcherAW-HS50 HUB Set the Power switch to the on position Turning the unit’s power on and offSet the Power switch to the OFF position Checking the video output Displaying the OSD menus on an SDI monitor Turn off the power of the unitChanging the video format How to forcibly display the OSD menus Changing the connector for outputting the OSD menusOSD on-screen display menu operations Displaying and clearing the OSD menus Basic operations Main menu Moving between the main menu and submenusSubmenu Moving from the main menu to a submenu Selecting the line with the setting item Operations using the submenusChanging the setting Returning the setting to its default value Indications used in these instructions Wipe Menu Submenu Adj Border Col Setting itemMoving the blinking area Completing the changes Assigning signals to the crosspoint buttons Select the bus using the Shift functionBasic operations Background transitions Selecting the transition type Selecting the bus modeManual transitions Cut transition Auto transitionTIME/CBGD Menu Auto Time Operation Menu Time Unit Wipe Setting the border width and soft effectSelecting the wipe direction Selecting the wipe pattern Adjusting the border color Setting the border colorRegistering and recalling the preset memories KEY Setting the PinP and KEY priorityConcerning key combinations Selecting the key materials Setting the transition duration TIME/CBGD Menu KEY TimeKey transition Key Type Key setupFill Set Fill Col Set Edge Col Edge TypeAdj Edge Col Edge Direction Mask Adjust1, Mask Adjust2 Key adjustmentsClip Gain Maker Chroma key adjustmentsMarker Pos Sample Cancel Ref AdjustMarker Aspect Influence PinP picture in picture Setting the transition duration TIME/CBGD Menu PinP TimeSelecting the PinP material PinP transition Shape PinP settingsPosX/Y/Size Border Width Set To Preset Trim Adjust1, Trim Adjust2Trim Adjust1 item Trim Adjust2 item Transition between PinP materials Input Menu Mode Normal Selecting the Dot by Dot modeEffect dissolve DbyD Color Adjust Internal color signalsFTB fade to black Cbgd Color Select the output signal using the a bus crosspoint buttons Switching the AUX outputSelecting the AUX bus material Transitions between AUX materials Displaying the 5 KEY Adjust Menu submenu Setting the User buttonsDisplaying the chroma key markers Displaying the 3 PinP Menu submenu Transferring images from the AUX bus Frame memoriesUSER/FMEM Menu Fmem Select USER/FMEM Menu AUX to Fmem Rv Review Saving images in the flash memory USER/FMEM Menu Fmem ModeEx Exec Input signal settings Input/output signal settingsList of settings by input signal Setting the material name type Setting the input mode Setting the freeze method Setting the material namesHow to set the material names Frame Setting the video process function Freezing and canceling the freezing of the input imagesSetting the up-converter Input Menu/SDI-IN3 UCScale/ECPos Input Menu/SDI-IN4 Resolutions supported Setting the input image scalingInput Menu/SDI-IN3 UCMvdet/Sharp Input Menu/SDI-IN4 Input Menu/DVI-IN Scale Table of DVI input scaling sizes 1600 16801920 Input Menu/DVI-IN Size Freq Dot Clock Displaying the input image informationDVI-D formats supported Assigning the output signals Setting the output signalsSetting the color areas Setting the DVI-D output signals Output Menu DVI-OUTMvdet Output Menu DVI-OUTScale Screen layout Setting the multi view display Setting the tally displays Setting the split frames and characters Setting the input signal marks Setting the level meters System menu settings System settingsSetting the video format How to specify the video format and then start the system Setting the ancillary data System initialization Network settings OSD on-screen display settings Operation menu settingsOperation Menu OSD Size Operation Menu OSD Back Other settings Version displays Bus status displays LAN connection External device control interfacesSub 15-pin, female, inch thread Example of an open collector output connection Image transmission functions Connections with a computerConnections How to install the software Basic operations of software Setting the IP addressStartup Exit Transferring images from the computer to the unit Image transfer Transferring the unit’s images to the computer Transferring the setup data to the unit Transferring the setup data from the unit Sub menu Setting item Setting menu tables KEY Setup Menu KEY Adjust Menu ChromaKey Menu XPT1 SDI SQ, EC, LB SDI-OUT1 FAN Sub menu Unit mm inch Appearance Specifications DVI-D output Video delay timeControl I/O Other Power supply Temperature HumiditySupplied power cord Dimensions Appendix glossary Setup Data Preset BusGeneral Purpose Interface Hue Key Edge Tri-level Sync TransitionTrimming Up Converter F0410Y0 Operating Instructions Basics  this Apparatus Must be Earthed Important Safety Instructions Appearance Specifications Concerning the ratings display Disclaimer of warranty Characteristics Parameter operation using PAN/TILT lever and Zoom button CD-ROM Concerning the consumable parts  Cooling fan  Alarm indicator Alarm POWER indicator Power LINK indicator Link  Shift button Shift  User buttons User 1, User OSD/TIME dial OSD/TIME  OSD on button OSD on  FTB on button FTB on  KEY on button KEY on CUT button Bkgd CUT  Auto button Bkgd Auto  MIX button MIX  Bus tally indicators A, B Wipe button Wipe  BUS Delegation buttons AUX, PinP, KEY-F/S While the indicator of the PinP button is blinked While the indicators of all three buttons are offWhile the indicator of the KEY-F/S button is blinked  Memo   SDI OUT connectors SDI OUT 1  Power switch Power SDI in connectors SDI in 1 to  DVI in connector DVI  LAN connector LAN RJ-45 10BASE-T/100BASE-TX  DVI OUT connector DVI OUT Cooling fan  DC in connector 12V in DC 12 V, 2.0 a  Ground terminal Signal GND Preparations AW-HS50 Block diagram Compact Live Switcher AW-HS50 AW-HE50S Turning off the power Turning on the power Changing the video format Displaying and clearing the OSD menus Basic operations OSD on-screen display menu operations USER button status display Moving between the main menu and submenusDisplaying menus consisting of more than one Change the setting Select the line with the setting item Move the blinking part Indications used in this Operating InstructionsComplete the changes Example When 2 Wipe Menu is displayed Direct operations using the User buttons and OSD/TIME dial List of menu delegation functions Menu delegation function 67 2-5/8 53 2-1/16 DVI  High-resolution multi view mode supported Supplied AC adapter Power requirementsCurrent consumption  H  D F0610Y1070 D