Sanyo VCC-WB4000 Menu select buttons, LIVE VIEW button, VIEW FRAME button, NETWORK button

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

Network Camera (Wired LAN) Settings

2Menu select buttons

The live image display area and setting area changes when you click on one of these buttons.

•[LIVE VIEW] button

Live images can be monitored.

•[VIEW FRAME] button

Sets the live image display area to a fixed image size (720x480).

•[NETWORK] button

Used when making network settings.

•[WIRELESS LAN] button

Used when making wireless LAN settings.

•[PPP] button

Used when setting up an Internet connection using a modem.

Archive software (sold separately) is required when using these settings.

•[CAMERA] button

Used when making settings for the camera such as camera title, image quality and day/night mode.

•[ALARM] button

Used when making settings for alarm recording and motion sensors.

•[CLOCK] button

Used when setting the camera’s clock.

•[RS-232C] button

Used when setting the communication speed when the camera is connected directly to the computer.

•[LANGUAGE] button

Click this button if you would like to change the language. The language selection screen will be displayed.

•[STATUS] button

Used when checking firmware versions and information relating to the camera.

3Network disconnect button

Click this button to shut down operation of the network camera. The following message will be displayed when this button is clicked. To

reconnect the camera, click the (Refresh) button in the title bar.

4[Get JPEG2000 PLUG-IN] button

If you need to install the JPEG2000 plug-in software, click this button to point the browser to a website page for downloading the software.

Select “JPEG2000 Plug-in Software” and then start the download. You will need an Internet connection in order to download the software.

5ALARM indicator

Camera title

•Off: No alarm data, or recording of images is complete

•Lit red: Post-alarm recording in progress

•Lit orange: Pre-alarm recording in progress

English – 17 –