Sanyo VCC-WB4000 Alarm Settings, Click the ALARM menu select button, Motion detector settings

Models: VCC-WB4000

1 68
Download 68 pages 32.58 Kb
Page 33
Image 33
Alarm Settings

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

Alarm Settings

Click the [ALARM] menu select button.

The camera is equipped with two types of alarm function. When an outside intruder is detected, these alarm functions can be used to record the images immediately before the alarm occurred (pre-alarm recording) and

the alarm images themselves (post-alarm recording) into the camera’s internal memory or onto a memory card, and these recorded images can then be played back.

External alarm sensor settings

Motion detector settings

When a device such as an infrared sensor is connected to the ALARM IN terminal at the rear of the camera and this sensor detects an intruder, the camera images are recorded in the camera's internal memory.

Once “EXTERNAL ALARM” has been set to either “NO” or “NC”, further detailed settings can then be made.

1

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

COM

 

 

 

 

4

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

 

 

 

 

 

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

While viewing the live images, you can set sensor marks [ú] in the motion sensor detection area, and also set the detection sensitivity. When the sensor detects an intruder, the camera images are recorded in the camera's internal memory.

Detailed settings can be made if the “MOTION DETECTOR” alarm setting is set to “ON”.

Alarm detection and recording

Alarm checking (Output)

If an alarm is detected by either an external alarm sensor or a motion detector, the ALARM indicator and the ALARM DATA indicator illuminate simultaneously.

When images are being recorded in the camera's internal memory, the ALARM indicator switches off and the ALARM DATA indicator illuminates red. Playback of alarm recording images is possible at this time.

When an alarm has been detected by either an external alarm sensor or a motion detector, the alarm status can be checked visually and/or audibly.

For example, if an indicator is connected to the ALARM IN terminal the indicator can be made to illuminate when an alarm is being received, or if a buzzer is connected, it can be made to sound at this time.

COM

Buzzer etc.

 

 

 

 

 

 

 

 

 

 

 

– 32 –

 

 

 

 

 

English

Page 33
Image 33
Sanyo VCC-WB4000 Alarm Settings, Click the ALARM menu select button, External alarm sensor settings, Alarm checking Output