L5AM2/US
WIRELESS LAN SET Settings
Description of WIRELESS LAN SET Screen
1
2 
3
4
1CURRENT CHANNEL
The transmission mode (frequency channel) that was set for the wireless LAN device (access point) will be displayed here automatically.
2ESS ID
This is a verification code for transmissions sent over the wireless LAN from the camera to the wireless LAN device.
Extended Service
3WEP ENCIPHERMENT (Default setting:
DISABLE)
This is a security function that encrypts the data being transmitted so that it cannot be intercepted by an unauthorized third party.
Available settings:
•DISABLE: Encipherment is not used.
•WEP40 (WEP64): The encryption key uses 40 bit (64 bit) data.
•WEP128: The encryption key uses 128 bit data.
*128 bit encipherment provides a higher level of security.
*WEP: Wired Equivalent Privacy
4ENCRYPTION KEY
Up to four types of encryption key can be set.
Rules for encryption key entry:
•WEP40 (WEP64): The encryption key can consist of up to 5 alphanumeric characters.
•WEP128: The encryption key can consist of up to 13 alphanumeric characters.
Encipherment Settings
If you do not type in the same encryption key that has been set for the wireless LAN device, communication will not be possible. Make a note of the encryption key and type it in.
Example: Encryption key 1: 1234567890000 Encryption key 2: 12345 Encryption key 3: ABCDE12345678 Encryption key 4: ABCDE
1 If using encryption key 1 (or 3), select “WEP128” from the
2 Click encryption key “1”.
3 If using encryption key 2 (or 4), select “WEP40” from the
4 Click encryption key “2”.
5 Click the [SET] button.
ESS ID and the encryption key for the camera and the wireless LAN device will be verified.
Note:
•If you are not using encipherment, set “WEP ENCIPHERMENT” to “DISABLE”.
•If you do not type in an encryption key, the encryption key numbers cannot be selected.
English | – 53 – |
