Sanyo VCC-WB4000 PPP Dial-up Settings, PPP Connection to an Internet Service Provider

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

PPP (Dial-up) Settings

Two types of PPP settings can be made: Connecting to an “Internet Service Provider” or “Connecting from a computer”.

PPP Connection to an Internet Service Provider

You can connect the camera to an Internet Service Provider via a telephone line and then use the separately-sold Network Archiving Software to transmit alarm images.

☞Connecting the camera and installing the software

1 Camera wired LAN settings (TCP/IP settings)

Make sure that the settings in “Network Camera Settings” (p. 15) have been carried out.

2 Connect a serial cable between the RS-232C terminal at the rear of the camera and a modem.

PC CARD Internet

MONITOR	ETHERNET	RS-232C
OUT
	D/N IN COM AC24V	GND

PC

POWER 1 2

MODEM	DC12V
ALARM IN OUT
	CLASS 2 WIRING

Serial cable

PC

1	2	Modem
MODEM

Set pin 1 to “MODEM”

5 Install the Network Archiving Software onto the computer.

Note: After installing the software, close the software window.

6 Make the Camset settings.

Camset only makes the settings that are required for setting up the camera. Refer to the documentation for the Network Archiving Software for further details.

1Double-click the Camset icon on the desktop.

When Camset is opened for the first time, no files have yet been created, so the following message will be displayed. Click the [OK] button. “CAMSET MAIN” will then be displayed.

3 Set pin 1 of the PC/MODEM select switch at the rear of the camera to the “MODEM” setting.

Note: After moving the select switch, be sure to turn the power off and then back on again.

4 Camera PPP settings

Make the settings for transmitting alarm data. Refer to “DIAL TO PROVIDER Settings” (p. 56) for details.

Note: After making the PPP settings, close the camera setting screen.

– 54 – English