Sanyo VCC-WB4000 Name and Function of Each Part, D/N In Com, Alarm In Out, Link indicator

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

Name and Function of Each Part

I

			PC CARD
	MONITOR	ETHERNET	H
8	OUT		RS-232C

G

D/N IN COM AC24V

PC

POWER 1 2

MODEM	DC12V
ALARM IN OUT

GND

CLASS 2 WIRING

J 9 F

8Link indicator

This indicator illuminates when the camera is connected to a network. It flashes while data transmission is in progress.

The indicator switches off when the camera is connected to a wireless LAN.

9Alarm/D/N (Day/Night) terminals

D/N IN COM

BC

A

D

ALARM IN OUT

AALARM IN terminal (IN)

Connect this terminal to an infrared sensor or similar use in external detection of intruders.

BD/N IN terminal (D/N IN)

This can only be used when COLOR mode is set. A device such as an infrared sensor can be used to automatically switch between color images and black & white images.

CALARM OUT terminal (OUT)

Connect this terminal to a buzzer or lamp that is used to warn when an alarm is detected by means of motion sensor or alarm input. In addition, when the day/night function (COLOR mode or TIMER mode) is being used, an IR lamp or other device can be made to illuminate when monitoring switches to black & white images. (Output rating: 18 V, 25 mA)

DGround terminal (COM)

FPower supply input terminals (AC24V, DC12V, GND)

GRS-232C connector

Use this connector to connect the camera to a modem for transmission of data along telephone lines, or for connecting the camera to a computer.

Use the PC/MODEM select switch to change the camera operation between modem and computer operation.

HETHERNET connector

Use this connector to connect the camera directly to a computer or to a network. Use a 10Base-T or 100Base-TX (Category 5, UTP) cable to make the connection.

ILens iris output connector

Connect this connector (4-pin socket) to the lens iris plug of the automatic iris-type lens (sold separately).

JPC/MODEM select switch

Use this switch to set the function of the RS-232C connector when connecting the camera directly to either a modem or computer.

Note:

•Make sure that the camera’s power is turned off before setting the function of the RS-232C connector.

•Using the RS-232C connector to connect the camera to a computer is only done for service purposes. You should not use the PC/MODEM select switch yourself.

– 6 – English