Panasonic AW-HS50N Specifications, SDI outputs, HD: Serial digital component SMPTE 292M

4. Specifications

SDI outputs	HD: Serial digital component (SMPTE 292M)
	SD: Serial digital component (SMPTE 259M)
	2 signal lines: SDI OUT 1, SDI OUT 2
		(Only the SDI OUT 1 signals are split into two)
	HD: SMPTE 292M (BTA S-004B) standard complied with
	• Output return loss		More than 15 dB (5 MHz to 1.5 GHz)
	• Output level		0.8 V [p-p] 10 % (75 )
	• Rise time		Less than 270 ps
	• Fall time		Less than 270 ps
	• Difference between rise time and fall time
			Less than 100 ps
	• Alignment jitter		Less than 0.2 UI (130 ps)
	• Timing jitter		Less than 1.0 UI
	• Eye aperture ratio		More than 90 %
	• DC offset		0 0.5 V
	SD: SMPTE 259M standard complied with
	• Output return loss		More than 15 dB (5 MHz to 270 MHz)
	• Output level		0.8 V [p-p] 10 % (75 )
	• Rise time		Less than 1.5 ns
	• Fall time		Less than 1.5 ns
	• Difference between rise time and fall time
			Less than 0.5 ns
	• Jitter		Less than 0.2 UI
DVI-D output	Digital RGB (Vertical frequency: 60 Hz):
		XGA (1024  768), WXGA (1280  768), SXGA (1280  1024),
		WSXGA+ (1680  1050), UXGA (1600  1200), WUXGA (1920  1200)
	Digital RGB: 1080/50p, 1080/59.94p
	 High-resolution multi view mode supported:
		Signals are also output with a high resolution even when SD has been selected
		as the system mode.
		When the high-resolution multi view mode is enabled, MV is assigned to
		the DVI OUT connector, and MV cannot be assigned to the SDI OUT 1
		connectors or SDI OUT 2 connector.
	 Analog output signals are not supported.
Video delay time	1 frame (F)
	 Video signals that have passed through the PinP, multi view display, DVI-D input
		or DVI-D output will be delayed in each case by up to one frame.

32