Panasonic TH-P55ST30P 3D Refresh Rate, Resolution Enhancer, Side Panel, Overscan, Pixel Orbiter

3D Refresh Rate

• Auto

• 100Hz

• 120Hz

Resolution

Enhancer

• Off

• Mid

• Max

Side Panel

• Off

• Low

• Mid

• High

	16:9 Overscan
	• Off
Settings	• On
	• Auto
	AV Colour System
Advanced	• PAL
	• SECAM
	• M.NTSC
	• NTSC

Colour Matrix

•SD

•HD

DVI Input Setting

•Normal

•Full

Pixel Orbiter

•Auto

•On

Scrolling Bar

Reset to Defaults

∗1 : PC input mode only

Changes the setting of the high-speed motion picture response

Enhances the picture resolution to make the image sharper

•This function is available for SD (Standard definition) signal.

•As for HD (High definition) signal, this function is available when aspect mode is set to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].

•Not valid on VIERA Connect and Media Player

Increases the brightness of the side panel

•The recommended setting is [High] to prevent panel “image retention”.

[On]:Default - Image is overscanned by ~5% beyond the edge of the screen to hide edge video noise

[Off]:Displays image in its original size including edge video noise such as lines, dashes, dots etc.

•Applicable for video signals when TV aspect is set to [16:9]

•Memorised separately for SD and HD channels / signals

Selects optimum colour system based on video signals in AV mode

Available only with 480p or 576p input on video signals in a natural colour from digital equipment connected to AV1 component or HDMI1 / HDMI2 / HDMI3 / HDMI4 terminals. Select [SD] or [HD] to adjust suitable colour parameters for [SD] (standard definition) or [HD] (high definition)

•[SD]: Input signal is a normal TV system

•[HD]: Input signal is a high definition system

Changes the black level in the image for HDMI input mode with DVI input signal manually

•When the DVI input signal from the external equipment, especially from PC, is displayed, the black level may not be suitable. In this case, select [Full].

•The black level for HDMI input signal will be adjusted automatically.

•For HDMI input mode with DVI input signal only

Selects the mode for wobbling of the image to prevent panel “image retention”

[Auto]: Automatically works only for the appropriate images and you rarely recognise the wobbling.

Scrolls the vertical bar to prevent panel “image retention”

•Press the OK button to start scrolling and press any buttons (except Standby) to exit this mode.

Press the OK button to reset the present Picture Viewing Mode of the selected input to the default settings

How to Use the Menu Functions

37