3D Eyewear (TH-P55ST30M, TH-P55ST30P)
Lens type |
| Liquid Crystal Shutter | |
Usage temperature range | 0 °C - 40 °C | ||
Charging power supply | DC 5 V (supplied by USB terminal of a Panasonic TV) | ||
|
| ||
Battery |
| DC 3.7 V, 70 mAh | |
| Operation time*1: Approx. 30 hours | ||
|
| Charging time*1: Approx. 2 hours | |
Viewing range*2 |
| Transmitter for 3D Eyewear | |
| Within 10’5” (3.2 m) from front surface | ||
|
| (Within ± 35° horizontal, ± 20° vertical) | |
Materials |
| Main body: Resin | |
| Lens section: Liquid crystal glass | ||
|
| ||
Dimensions | Width | 6.70 ” (170.1 mm) | |
Height | 1.63 ” (41.2 mm) | ||
(not including | |||
nose pad part) | Overall | 6.69 ” (169.8 mm) | |
| length |
| |
Mass |
| Approx. 38 Net | |
*1 Operation time/charging time
•The battery deteriorates after repeated use, and the operation time eventually becomes short. The figures above are at shipping from the factory, and are not a guarantee of performance.
*2 Viewing range
•The location of the 3D Eyewear transmitter differs depending on the model of television.
•There are differences in the viewing range of the 3D Eyewear among individuals.
•The 3D Eyewear may not operate correctly at the outside of the viewing range.
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note the model number and the serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
| Model Number | Serial Number |
|
|
|
|
|
M0311-0
Printed in Japan
