Panasonic AW-HS50N Setting the input mode, Setting the material name type, Normal, Auto, Default

4. Input/output signal settings

4-1-1. Setting the input mode

[10.1] Input Menu/SDI-IN1

1. Mode

[10.2] Input Menu/SDI-IN2

1. Mode

[10.3] Input Menu/SDI-IN3

1. Mode

[10.4] Input Menu/SDI-IN4

1. Mode

“Normal” or “DbyD” can be set for the SDI-IN1 and SDI-IN2 connector signals.

An up-converter (UC) function is provided for the SDI-IN3 and SDI-IN4 connectors so “Normal”, “UC”, “DbyD” or “AUTO” can be set for these connectors.

The mode is set for each connector only when HD has been selected as the system format setting.

When SD has been selected for the system format, “Normal” is always set as the mode.

Normal:

The input signals in conformity with the system format take effect.

DbyD:

When SD signals with the same frame rate as the system format have been input, they are input on a dot by dot (equal size) basis with no up-conversion.

In this mode, there is minimal deterioration in the image quality and, as such, the mode is used to combine SD format materials using the PinP function.

￿This mode can be set only when 1080i is used as the system format.

UC:

When SD signals with the same frame as the system format have been input, they are up-converted.

Auto:

Input signals in conformity with the system format take effect.

Furthermore, if SD signals with the same frame rate as the system format are input when HD is selected as the system format, they are up-converted.

￿In the Auto mode, the images may be disturbed when the input signals are switched.

4-1-2. Setting the material name type

[10.1] Input Menu/SDI-IN1

4. Name Type

[10.2] Input Menu/SDI-IN2

4. Name Type

[10.3] Input Menu/SDI-IN3

4. Name Type

[10.4] Input Menu/SDI-IN4

4. Name Type

[10.5] Input Menu/DVI-IN

2. Name Type

These items are for setting the type used when providing material names for the signals which are input to each connector.

Default:

The default settings (INPUT1 to INPUT5) are used.

Preset:

The material names provided ahead of time are used. The names are set using the “Name” item.

User:

A material name is set using up to 10 characters. The actual material names are set using the “Name” item.

Cam Name:

When an IP connection is established with the AW-RP50, the remote camera names set by the AW-RP50 are set as the material names.

50