Panasonic AW-HS50N operating instructions OSD on-screen display menu operations

2. Preparations

2-5. OSD (on-screen display) menu operations

The unit’s settings are selected using the OSD menus which are displayed on the external monitor. Described here is how to operate the OSD menus.

2-5-1. Displaying and clearing the OSD menus

Basic operations

When the OSD ON button is held down, the OSD ON button indicator lights, and the OSD menus are displayed on the external monitor.

When the OSD ON button is held down while an OSD menu is displayed, the OSD ON button indicator goes off, and the OSD menu display is cleared.

Note

If parts of the OSD menus overlap the multi view display frame, the split screen frames and characters will not be displayed.

Changing the connector for outputting the OSD menus

=?1RGTCVKQP/GPW

15&176 5&+176&8+176

15&5K\G (7..

15&$CEM 1P -G[2TKQTKV[ 2KP2QXGT-';

$WU/QFG 2)/ #256 $

6KOG7PKV 5GE

5NKFG.GXGT $-)&

)2++PRWV 'PCDNG

)2+1WVRWV 'PCDNG %CO%QPV.KPM 1HH

5;56'//GPW 7PNQEMGF

The OSD menu output connector can be changed using the “1. OSD OUT” item on the [13] Operation Menu.

SDI-OUT2:

The menus are output from the SDI OUT 2 connector.

DVI-OUT:

The menus are output from the DVI OUT connector.

SDI-OUT2+DVI-OUT:

The menus are output from both the SDI OUT 2 connector and DVI OUT connector.

Note

The OSD menus cannot be output from the SDI OUT 1 connector.

2-5-2. How to forcibly display the OSD menus

When the OSD ON button is held down while holding down the SHIFT button, the following settings are established automatically.

 The OSD ON button indicator lights, and the OSD menus are displayed on the external monitor.

 The output destination of the OSD menus is set to both the SDI OUT 2 connector and DVI OUT connector.

 The screen size of the OSD menus output from the DVI OUT connector is set to Auto.

(The menus are output in the size that corresponds to the input specifications of the PC monitor which is connected to the unit.)

24