Panasonic AW-HS50N Transition between PinP materials, PinP BUS Trans, Basic operations

3. Basic operations

3-4-4. Transition between PinP materials

By switching between the PinP bus crosspoint buttons, the MIX transition can be executed from one PinP material to another PinP material for the transition duration which has been set.

￿￿When one material set to the Dot by Dot mode and another material have been switched, cut switching where the images change in an instant is performed.

<Setting the transition duration>

[1]TIME/CBGD Menu

7.PinP BUS Trans

While the transition is underway, the indicator of the transition source button lights, and the indicator of the transition destination button blinks.

When the transition is completed, the indicator of the transition source button goes off, and the indicator of the transition destination button lights.

When another signal has been selected while a transition is underway, the processing for the transition will continue from the interim point.

This operation can also be enabled or disabled using this menu item.

42