Panasonic AW-HS50N Setting the border color, Adjusting the border color, 2WIPE Menu 6.Position

3. Basic operations

3-2-4. Setting the border color

[2]WIPE Menu

4.Set Border Col

This item is used to select any of the following colors for the borders.

White, Yellow, Cyan, Green, Magenta, Red, Blue, Black

3-2-5. Adjusting the border color

[2]WIPE Menu

5.Adj Border Col

This item is used to adjust the hue (H), saturation (S) and luminance (L) of the color which has been set for the borders.

3-2-6. Setting the wipe start position

[2]WIPE Menu

6.Position

This item is used to set the position where the transition is to start for wipe patterns No.9, 10, 11, 12 and 13 using the X and Y coordinates.

<X-Pos and Y-Pos setting range>

Inside screen area

Outside screen area

￿￿While the [2] WIPE Menu submenu is displayed, the items to be selected can be switched using the USER buttons.

USER1: WIPEPos X, USER2: WIPEPos Y,

USER3: —, USER4: —

3-2-7. Registering and recalling the preset memories

[2]WIPE Menu

7.Set To Preset

Up to four sets of wipe settings can be registered in the preset memories.

<Registering the settings in the preset memories>

Select 1, 2, 3 or 4, and press the OSD/TIME dial.

The status currently set is now registered in the selected preset number.

<What can be registered in the preset memories>

￿Wipe patterns

￿Wipe directions

￿Border width of wipe

￿Soft effect amount

￿Border colors

￿Position at which the transition starts

<Calling the preset memory settings>

What has been registered in the preset memories can be called using the USER buttons.

￿￿To call what has been registered, select “WIPE PRSET” using the menu operation below.

[12]USER/FMEM Menu

1.USER1

31