Panasonic AW-HS50N Preparations, Installation precautions, Connecting the power supply

Models: AW-HS50N

1 125
Download 125 pages 42.82 Kb
Page 17
Image 17
2. Preparations

2. Preparations

2-1. Installation precautions

￿￿In addition to heeding the points presented in the “Safety precautions”, observe the following precautions as well.

Be absolutely sure to ask your dealer to do the jobs of installing and connecting the unit.

Connecting the power supply

￿￿Use within AC 100 V to 120 V.

￿￿Be absolutely sure to use only the power cord and AC adapter supplied

with the panel.

￿￿ Be absolutely sure to connect the grounding terminal of the power cord to ground.

￿￿Be absolutely sure to connect the ground terminal (SIGNAL GND) at the rear of the unit to the system ground.

￿￿Insert the DC plug as far as it will go until it locks into position.

￿￿When the unit is not going to be used for a prolonged period of time, turn off its power, and disconnect the power plug from the AC outlet.

4

3

POWER

1

2

ON

 

SDI IN

1

 

IN

2

 

12V

3

 

 

 

BOOT

 

 

SV

NM

 

 

 

 

Handle carefully!

￿￿Dropping the unit or subjecting it to strong impact or vibration may cause trouble and/or malfunctioning.

Do not allow any foreign objects to enter inside the unit!

￿￿Allowing water, metal items, scraps of food or other foreign objects inside the unit may cause a fire and/or electric shocks.

Choosing the best installation location

￿￿This unit is designed for indoor use only.

￿￿Install the unit on a sufficiently strong, stable and level surface for use.

￿￿Ensure a space of at least 100 mm (3-15/16˝) around the rear vents to avoid obstructing ventilation.

In particular, ensure sufficient space between ventilation and wiring when using mounted in a panel or table.

￿￿Do not install the unit in a cold place where the temperatures will drop below 0 °C (32 °F) or in a hot place where the temperatures will rise above 40 °C (104 °F).

￿￿Avoid installing the unit where it will be exposed to direct sunlight or to the hot air that is blown out from other products.

￿￿Installing the unit in a very humid, dusty or vibration- prone location may give rise to trouble.

Ventilation holes

17

Page 17
Image 17
Panasonic AW-HS50N Preparations, Installation precautions, Connecting the power supply, Handle carefully