Panasonic AW-HS50N Effect dissolve, 1TIME/CBGD Menu 8.PinP EFFDSLV, 10Input Menu 1.Mode Normal

3. Basic operations

3-4-5. Effect dissolve

This function enables one effect to be switched to another smoothly when the data in the preset memory where the PinP image settings were registered is called using the USER buttons.

￿￿Before using the function, set the transition duration and either enable or disable for effect dissolve using the menu below.

[1]TIME/CBGD Menu

8.PinP EFFDSLV

<Items covered by effect dissolve>

￿Image position (X, Y)

￿Image size

￿Border width

￿Border color

￿Soft effect amount

￿Trimming setting

<Selecting the Dot by Dot mode>

If an SD format image is used as the PinP material when the system is operating in an HD mode, images can be combined in the Dot by Dot mode (actual size images).

In this mode, the SD format images are not up-converted so image deterioration can be prevented.

[10]Input Menu

1.Mode

Normal:

The input signals in conformity with the system format are enabled.

DbyD:

The images are combined in the Dot by Dot mode (actual size images).

	SD	HD
			SD
PinP material

PinP combined images

43