Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AW-HS50N POWER switch POWER, SDI OUT connectors SDI OUT, DVI IN connector DVI IN

Models: AW-HS50N

1 125

Download 125 pages 42.82 Kb

Page 107

POWER switch [POWER]

1. Parts and their functions

1-2. Rear panel

		SIGNAL GND
					4	3	POWER
						3
					1	2
					1	ON
						ON
	SDI OUT			SDI IN
2	1	4	3	2		1
							12 V	IN
TALLY / GPI	DVI OUT		DVI IN		LAN
TALLY / GPI	DVI OUT		DVI IN
						BOOT
						SV NM

POWER switch [POWER]

When the POWER switch is set to the ON position, the POWER indicator () lights, and the unit can be operated.

SDI OUT connectors [SDI OUT 1, 2]

These are the HD/SD SDI signal output connectors. The following signals can be assigned to the connector by menu operations:

PGM, PVW, CLN, AUX, MV, KEYOUT

At the SDI OUT 1 connector, the output signals are split into two and output through two connectors.

It is the same signal that is output.

The OSD menu, multi view display frame, tally information, names of the materials and audio level meters are not displayed for the signals of the SDI OUT 1 connector.

When the high-resolution multi view mode is enabled, it is not possible to assign MV signals.

SDI IN connectors [SDI IN 1 to 4]

These are the HD/SD SDI signal input connectors. The following input modes can be set by menu operations:

SDI IN 1, 2: Normal, DbyD

SDI IN 3, 4: Normal, DbyD, UC, Auto

The video process function can be used for all the SDI IN 1 to 4 input signals.

The up-converter cannot be used for SDI IN 1 and 2.

When signals differing from the system format have been input, they are replaced with black signals.

(However, when HD has been selected as the system format setting and DbyD or UC has been selected as the input mode setting, SD signals with the same vertical frequency can be input.)

DVI IN connector [DVI IN]

This is the DVI-D signal input connector.

Signals with the following resolution can be input to this connector.

Digital RGB (vertical frequency: 60 Hz): XGA (1024  768), WXGA (1280  768), SXGA (1280  1024), WSXGA+ (1680  1050), UXGA (1600  1200), WUXGA (1920  1200)

Digital RGB:

1920  1080/50p, 1920  1080/59.94p

Analog signals cannot be input to this connector. A DVI-I cable cannot be used.

16

Image 107

Panasonic AW-HS50N POWER switch POWER, SDI OUT connectors SDI OUT, SDI IN connectors SDI IN 1 to, Rear panel

Contents

Operating Instructions Compact Live SwitcherModel No. AW-HS50N THIS APPARATUS MUST BE EARTHED Safety precautionsindicates safety information IMPORTANT SAFETY INSTRUCTIONSSafety precautions Operating precautions ContentsCharacteristics Accessories9. Setting menu tables 4. Input/output signal settings5. Setting the multi view display 6. System settingsConcerning the Operating Instructions Network-relatedprecautionsBefore use OverviewFrame synchronizer system CharacteristicsCompact design Multiple formats supportedTransmission of tally information Switching of materialsControl using PAN/TILT lever and ZOOM button Display of camera informationRequired personal computer environment AccessoriesWhen the product is to be discarded Operating precautionsMaintenance Precaution to be observed during productionButton indicator ON POWER indicator POWERALARM indicator ALARM LINK indicator LINKButton indicator ON: Now fading out When the main menu is displayedWhen a submenu is displayed Button indicator OFF: The OSD menu is hiddenAUTO button AUTO Bus tally indicators A, BButton indicator OFF: Auto transition is complete Button indicator ON: Wipe selection underwayB crosspoint buttons A bus crosspoint buttons 1 toB bus crosspoint buttons 1 to MemoDVI IN connector DVI IN POWER switch POWERSDI OUT connectors SDI OUT 1, SDI IN connectors SDI IN 1 toGround terminal SIGNAL GND DVI OUT connector DVI OUTLAN connector LAN RJ-45 10BASE-T/100BASE-TX Cooling fan DC IN connector 12V IN DC 12V, 2.5A2. Preparations 2-1.Installation precautionsConnecting the power supply Choosing the best installation location2. Preparations 2-2-1.Block diagram2-2.Connections with other devices AW-HS502. Preparations Compact Live Switcher2-2-2.Example of connections AW-HS50AW-HE50 SDI video signal2. Preparations AW-HE501Set the POWER switch to the ON position Turning on the powerTurning off the power 2-3.Turning the unit’s power on and offChanging the video format 2Turn on the power of the SDI monitor1Turn off the power of the unit 2-4-2.Displaying the OSD menus on an SDI monitorBasic operations How to forcibly display the OSD menus2-5.OSD on-screendisplay menu operations 2-5-1.Displaying and clearing the OSD menus=?6+/%$&/GPW 2-5-2.Moving between the main menu and submenusMoving between the main menu and submenus #9*5/CKP/GPW=?9+2/GPW 2-5-3.Operations using the submenus1Selecting the line with the setting item 2Changing the setting2. Preparations 2-5-4.Indications used in these instructions3Moving the blinking area 4Completing the changes3-1.Background transitions 3-1-2.Select the bus using the SHIFT function3-1-3.Assigning signals to the crosspoint buttons 3. Basic operations<Setting the slide lever function> When only indicator A is lightedWhen both indicators A and B are lighted When only indicator B is lighted13Operation Menu 6.Time Unit 3-1-7.Auto transition3-1-8.Cut transition 1TIME/CBGD Menu 1.AUTO Time3-2-1.Selecting the wipe pattern 3-2-3.Setting the border width and soft effect3-2.Wipe 3-2-2.Selecting the wipe direction2WIPE Menu 7.Set To Preset 3-2-4.Setting the border color3-2-5.Adjusting the border color <X-Posand Y-Possetting range>PinP PinPKEYPin P 3-3-2.Setting the PinP and KEY priority3-3.KEY KEY PinP3. Basic operations 3-3-3.Selecting the key materials3-3-4.Key transition Set Fill Col 3-3-5.Key setupKey Type Fill4KEY Setup Menu 7.Edge Direction 4KEY Setup Menu 6.Edge Type4KEY Setup Menu 9.Set Edge Col 4KEY Setup Menu 10.Adj Edge Col5KEY Adjust Menu 2.Gain 3-3-6.Key adjustmentsMask Adjust1, Mask Adjust2 5KEY Adjust Menu 1.ClipMarker Pos 3-3-7.Chroma key adjustmentsExecuting the sampling automatically Maker6ChromaKey Menu 5.Ref Adjust Other chroma key settingsRef Adjust Cancel3. Basic operations 3-4.PinP picture in picture3-4-1.Selecting the PinP material 3-4-2.PinP transitionBorder Width 3-4-3.PinP settingsShape Pos:X/Y/Size8.Trim Adjust2 item Trim Adjust1, Trim Adjust2Set To Preset 7.Trim Adjust1 item3. Basic operations 3-4-4.Transition between PinP materials7.PinP BUS Trans <Setting the transition duration> 1TIME/CBGD Menu<Selecting the Dot by Dot mode> 3-4-5.Effect dissolve1TIME/CBGD Menu 8.PinP EFFDSLV <Items covered by effect dissolve>CBGD Color 3-6.Internal color signalsColor Adjust 3-5.FTB fade to black3. Basic operations 3-7.Switching the AUX output3-7-1.Selecting the AUX bus material 3-7-2.Transitions between AUX materials754 754 //5.%6 // 3-8.Setting the USER buttons<Displaying the 5 KEY Adjust Menu submenu> =?754///GPW 7542KP22TGUGV 7547542KP22TGUGV 7542KP22TGUGV 3-9.Frame memories3-9-1.Transferring images from the AUX bus =?754///GPW 7542KP22TGUGV3. Basic operations 3-9-2.Saving images in the flash memoryEx Exec 12USER/FMEM Menu 7.FMEM Mode M Mode=?+PRWV/GPW5&++0 4. Input/output signal settings4-1.Input signal settings =?+PRWV/GPWPreset 4-1-1.Setting the input mode4-1-2.Setting the material name type DefaultHow to set the material names 4-1-3.Setting the material names4-1-4.Setting the freeze method When “Preset” is selected10.2 Input Menu/SDI-IN2 3. Freeze 4-1-6.Setting the video process function4-1-7.Setting the up-converter 10.1 Input Menu/SDI-IN1 3. Freeze10.4 Input Menu/SDI-IN4 10. UC:Mvdet/Sharp 4-1-8.Setting the input image scalingResolutions supported 10.3 Input Menu/SDI-IN3 10. UC:Mvdet/SharpHD/1080i Table of DVI input scaling sizesDVI format Mode16001200 WSXGA+16801050 UXGA10.5 Input Menu/DVI-IN 7. V-Freq 4-1-9.Displaying the input image information10.5 Input Menu/DVI-IN 5. Size 10.5 Input Menu/DVI-IN 6. H-Freq4-2-3.Setting the DVI-Doutput signals 4-2.Setting the output signals4-2-1.Assigning the output signals 4-2-2.Setting the color areas11Output Menu 6.DVI-OUT:Mvdet 4.Input/output signal settings11Output Menu 6.DVI-OUT:Scale 2QU5QWTEG 2QU5QWTEG 5. Setting the multi view display5-1.Screen layout =?/WNVK8KGY2CVVGTP/GPW 5RNKVC5RNKV%JCTCEVGT .7/ .CDGN1P 6CNN4GFTGGP 5-2.Setting the split frames and characters5-3.Setting the tally displays =?/WNVK8KGY1WVTCOG/GPW TCOG.7/Right display 5-4.Setting the level meters5-5.Setting the input signal marks Left display=?5;56//GPW QTOCV K 6. System settings6-1.System menu settings 6-1-1.Setting the video format14SYSTEM Menu 4.AUX Anci 6-1-2.Setting the ancillary dataWhen an HD format is used When an SD format is used14SYSTEM Menu 9.IP Address 6-1-4.Network settings6-1-3.System initialization 14SYSTEM Menu 8.Initial5;56//GPW 7P.QEMGF 6-2.Operation menu settings6-2-1.OSD on-screendisplay settings #0 2QYGT 6GORCTCVWTG 13Operation Menu 5.BUS Mode 6-2-2.Other settings13Operation Menu 12.Power 13Operation Menu 13.Temperature:2659#UKIP 5&++0 +0276 6-2-3.Bus status displays6-2-4.Version displays $75#UKIP5VCVWU 2659D-sub 15-pin,female, inch thread 7. External device control interfaces7-1.LAN connection 7-2.TALLY/GPI8-2.Connections 8. Connections with a computer8-1.Image transmission functions 8. Connections with a computer 8-3.How to install the software<Exit> <Setting the IP address>8-4.Basic operations of software <Startup>8. Connections with a computer 8-5.Image transfer1.Select the mode 8. Connections with a computer8. Connections with a computer Transferring the setup data to the unit8. Connections with a computer <Transferring the setup data from the unit>Sub menu 9. Setting menu tablesSetting item SettingSetting 9. Setting menu tables4 KEY Setup Menu 5 KEY Adjust Menu Setting itemSub menu 9. Setting menu tablesSetting item Setting9 XPT SW Assign Menu 10 Input Menu 9. Setting menu tablesSetting item Setting10.3Input Menu/SDI- IN3xxxxxx 9. Setting menu tablesSetting item Setting11 Output Menu 12 USER/FMEM Menu 9. Setting menu tablesSetting item Setting13 Operation Menu 14 SYSTEM Menu 15 SYSTEM Status 9. Setting menu tablesSetting item SettingSub menu 9. Setting menu tablesSetting item SettingUnit: mm inch 10. AppearanceInputs 11. SpecificationsSignal formats Signal processingOther Video delay timeDVI-Doutput Control I/ODimensions temperaturePower supply Supplied power cordExplanation Automatic Video DelaylineAppendix glossary WordKey Edge Preset BusSetup Data General Purpose InterfaceTrimming TallyTransition Tri-levelSyncF0410Y0 Panasonic System Networks Co., Ltd.Compact Live Switcher Operating Instructions <Basics>Safety precautions THIS APPARATUS MUST BE EARTHED1Read these instructions 2Keep these instructions Safety precautionsIMPORTANT SAFETY INSTRUCTIONS indicates safety informationCharacteristics 4. Specifications3. Appearance ContentsAbout copyright and licence OverviewConcerning the Operating Instructions Trademarks and registered trademarksBefore use Disclaimer of warrantyNetwork security Multiple formats supported CharacteristicsCompact design Multi view display functionOn-screendisplay OSD CharacteristicsSwitching of materials Straightforward and flexible operabilityAC adapter AccessoriesRequired personal computer environment Precaution to be observed during production Concerning the consumable parts  Cooling fanOperating precautions Maintenance1. Parts and their functions POWER indicator POWERLINK indicator LINK ALARM indicator ALARMSHIFT button SHIFT When the main menu is displayedWhen a submenu is displayed USER buttons USER 1, USERAUTO button BKGD AUTO KEY ON button KEY ONFTB ON button FTB ON CUT button BKGD CUTWIPE button WIPE Bus tally indicators A, B2.When the indicator of the AUX button is blinked MIX button MIX2.When the indicator of the AUX button is blinked  Memo B bus crosspoint buttons A bus crosspoint buttonsDVI IN connector DVI IN POWER switch POWERSDI OUT connectors SDI OUT SDI IN connectors SDI IN 1 toGround terminal SIGNAL GND DVI OUT connector DVI OUTLAN connector LAN RJ-45 10BASE-T/100BASE-TX DC IN connector 12V IN DC 12 V, 2.0 A2. Preparations 2-1.Installation precautionsChoosing the best installation location the power cable and AC adapter2-2.Connections with other devices AW-HS502-2-1.Block diagram 2. Preparations2-2-2.Example of connections Compact Live Switcher AW-HS502. Preparations Switching hub connecting the unit to the AW-HE50and AW-RP50Example of IP connections SDI video signal1 Set the POWER switch to the OFF position Turning on the powerTurning off the power 1 Set the POWER switch to the ON position3 Turn on the power of the unit 1 Turn off the power of the unitChanging the video format 3 Hold down the OSD ON button2. Preparations 2-5-2.How to forcibly display the OSD menus2-5.OSD on-screendisplay menu operations Basic operationsUSER button status display 2-5-3.Menu configuration and moving between menusMenu configuration of the unit Moving between the main menu and submenusReturning the setting to its default value 2-5-4.Operations using the submenus1 Select the line with the setting item 2 Change the setting2. Preparations 3 Move the blinking part4 Complete the changes 2WIPE Menu Submenu 5.Adj Border Col Setting itemTurn the OSD/TIME dial to change the value Example: When 2 WIPE Menu is displayed2. Preparations Press the USER 1 button2. Preparations 2-5-7.Menu delegation function2-5-8.Bus status displays <List of menu delegation functions>189 7-7/16 3. AppearanceUnit: mm inch 67 2-5/8 53 2-1/16Inputs 4. SpecificationsSignal formats Signal processingHD: Serial digital component SMPTE 292M 4. SpecificationsVideo delay time SDI outputsCurrent consumption Power requirementsThe provided power cable is for 125 V AC or less Supplied AC adapterF0610Y1070 D Panasonic System Networks Co., Ltd.