Tyan Computer TYAN S1668 Reset Connector J45, Turbo LED Connector J42, Flash Eeprom J32Default

Reset Connector: J45

Pinout Assignment

1 Power Good

2 Ground

Turbo LED Connector: J42

Pinout Assignment

1 Cathode

2 Anode

Flash EEPROM: J32(Default 5V)

This jumper should be left at the factory default.

	Voltage	J32
	5V	1-2	(default)
	12V	2-3
InfraRed Interface: Con4 and Con5
	Pinout	Assignment
	1	Signal In
	2	Gnd
	3	Signal Out
	4	VCC
Super I/O Type: J26
	Type	J26
	665IR	1-2
	669IR	2-3

This setting depends on what type of SMC I/O chip is installed on the board. This jumper is set at the factory and should not be changed.

S1668-ATX-001 http://www.tyan.com 10