Panasonic AW-HS50N Trim Adjust1, Trim Adjust2, Set To Preset, Trim Adjust1 item

3. Basic operations

￿￿Trim Adjust1, Trim Adjust2

[3]PinP Menu

7.Trim Adjust1

8.Trim Adjust2

The method of trimming the PinP image and the area to be trimmed are set using the “7. Trim Adjust1” and “8. Trim Adjust2” items.

7.Trim Adjust1 item:

Off:

The image is not trimmed.

4:3:

The image is automatically trimmed so that its aspect ratio is 4:3.

Manual:

The image is trimmed in the area which has been set using the “8. Trim Adjust1” and “9. Trim Adjust2” items.

8.Trim Adjust2 item:

This is used to set the T (top) and B (bottom) of the trimming area.

Trimming area

PinP valid area

PinP original size

TOP (40) 50

0

BOTTOM (-40)

-50

-50	0	50
(-40)		(40)
LEFT		RIGHT

￿￿Set To Preset

[3]PinP Menu

9.Set To Preset

Up to four sets of PinP image settings can be registered in the preset memories.

<Registering the settings in the preset memories>

Select 1, 2, 3 or 4, and press the OSD/TIME dial.

The status currently set is now registered in the selected preset number.

<What can be registered in the preset memories>

￿Shape used when combining the images

￿Image position (X, Y)

￿Image size

￿Border width

￿Border color

￿Soft effect amount

￿Trimming setting

<Calling the preset memory settings>

What has been registered in the preset memories can be called using the USER buttons.

￿￿To call what has been registered, select “PinP PRSET” using the menu operation below.

[12]USER/FMEM Menu

1.USER1

41