Rancilio S1 TANK, E1 Description, Specifications and composition - 3.a - 3.b, Machine equipment

2. DESCRIPTION

The machines in the EPOCA series have been desi- gned to prepare express coffee and hot beverages.

Apositive-displacement pump inside the machine powers the heater in which the water is heated. By pressing the appropriate buttons, water is supplied to the spouts in the form of hot water or steam, ac- cording to needs.

The water to be used for the beverages is supplied directly by the water supply, pressurized by the pump and immediately heated by the steam produced by the boiler or from an incorporated tank containing a softener for softening the water by trapping calcium salts.

The machine is composed of a steel carrying struc- ture on which the mechanical and electrical compo- nents are fitted. These are completely covered with panels made of painted polyurethane and stainless

steel.

The beverages are dispensed at the front of the machine, where all the buttons, control devices and dispensers are to be found.

There is a cup-warming plate on the top of the ma- chine.

2.1. Specifications and composition (Fig.3 - 3.a - 3.b)

	A	B	C	D	E
E1 (Fig.3)	-	ok	1	1	1
S1 (Fig.3.a)	ok	-	1	1	1
S1TANK (Fig.3.b)	ok	-	1	1	1

Legend:

A Semiautomatic system; manual dispensing start and stop.

B Automatic system; electronic control of coffee doses dispensed.

C N. of coffee dispensing units. D N. of steam spouts.

E N. of hot water spouts.

1Steam tap

2Steam spout

3Hot water tap

4Hot water spout

5Coffee dispensing unit

6Coffee dispensing button

7Boiler water level indicator

8Gauge

9Power on-off switch and led

10Switch and boiler resistance engagement light.

11Water-tank

12Water shortage pilot light

2.2. Machine equipment

	MOD. E1-S1	MOD. S1 TANK
1 dose filter holder	1	1
2 dose filter holder	1	1
Filters	2	2
Disk for cleaning	1	1
1 mt. supply pipe	1	-
1,5 mt. supply pipe	1	-
1,5 mt. drainage pipe	1	-
Pipe connections	1	1
Doser and presser	1	1
Instruction manual	1	1
Brush	1	1

48