Chapter 1 Introduction
Rear Panel
There are 5 ports (Power, 2, 1, Line, and Phone) and a Reset Switch on the rear panel.
LINE | PHONE |
| ROUTER TO | COMPUTER | 1 |
2 |
|
POWER
RESET
Power Adapter | Ethernet Cable | Ethernet Cable | Phone Cord | Phone Cord |
(from Power Port | (from Port 2 to | (from Port 1 to | (from Line Port | (from Phone Port |
to Power Outlet) | Second Computer) | First Computer) | to Phone Jack) | to Telephone) |
Reset Switch
Depressing the reset switch for one or two seconds will reset the Modem. To restore to factory default settings, depress and hold for at least 10 seconds.
Power Port
This port is used to connect the smaller end of the Power cord.
Port 2
This Ethernet port is used to connect an Ethernet cable between the Modem and an additional computer.
Port 1
This Ethernet port is used to connect an Ethernet cable between the Modem and the first computer connected.
3
