Utilities5, Restore Default Settings | Actiontec electronic R7000M

Utilities5

To access the Dual PC Modem’s utilities, select Utilities from the “Main Menu” screen. The “Utilities” screen appears.

From here, the Modem’s factory default settings can be restored, the active user list viewed, and the firmware upgraded.

Restore Default Settings

To restore the Modem to its factory default settings, select Restore Default Settings from the “Utilities” screen. When the “Restore Default Settings” screen appears, click Restore Default Settings. Any changes made to the Modem’s settings will be lost and the factory default settings will be restored. During this process, the Modem’s Power Light flashes and the Modem is disabled.

Warning: Do not unplug the power adapter from the Modem during the Restore Default Settings process. Doing so may result in permanent damage to the Modem.

When the Power and Ethernet lights glow steadily green, the Modem is fully operational.

27

Image 30

Actiontec electronic R7000M user manual Utilities5, Restore Default Settings

Contents

Dual PC Modem Table of Contents Limited Warranty File and Printer SharingGlossary Package Contents Introduction1Minimum System Requirements Front Panel Modem FeaturesPower Light Modem Light Rear Panel Reset SwitchPower Port Port Phone Port Technical SupportLine Port Actiontec Electronics, Inc Setting Up Modem Connecting the First ComputerPage Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Configuring the Modem Page Connecting a Second Computer Page Setting Up the Modem Page Basic Setup Basic Setup DOD & Disconnect After Idle… Dial X To Reach an Outside Line Dial X To Disable Call Waiting Page Custom Setup Custom Setup Dhcp Server Configuration LAN IP AddressDhcp Server Beginning IP Address Setting the IP Address RangeSave Configuration Ending IP Address Status Diagnose Restore Default Settings Utilities5 Upgrade Firmware Active User List Slow Speed/Dropped Connections Troubleshooting Frequently Asked QuestionsTroubleshooting Windows 98, 98SE, and Me Windows 2000 and XP Placing the My Network Place Icon on the Desktop What connection speeds does the Modem support? Frequently Asked QuestionsIs the Modem flash-upgradeable? How do I do it? Does the Modem function as a cable or DSL modem? What is the valid IP range I can use for my home network? How do I find out what IP address my computer is using? What is NAT and how does it protect my network? Is my Modem a firewall? No. The Modem does not support MOH Setting Up Static IP Address Windows 98 and 98 SEPage Do not include the periods they are automatically entered Enter the following numbers in the Subnet mask text box Windows Me Page Do not include the periods they are automatically entered Enter the following numbers in the Subnet mask text box Windows Page Appendix a Setting Up Static IP Address Do not include the periods they are automatically entered 192.168.0.1 Windows XP Appendix a Setting Up Static IP Address Page 198.162.0.4 Page Specifications B LED IndicatorsGeneral Environmental Non-Windows C System Setup ClassicPage Appendix C Non-Windows System Setup Page File and Printer Sharing Windows 98 and MeFile Sharing Page Appendix D File and Printer Sharing Page Appendix D File and Printer Sharing Page Appendix D File and Printer Sharing Printer Sharing Windows Macintosh Glossary Ethernet Network ISP Internet Service ProviderMAC Media Access Control Address Firewall Router Weca Wireless Ethernet Compatibility AllianceWlan Wireless Local Area Network TCP/IP Transmission Control Protocol/Internet ProtocolPage Regulatory Compliance Notices ModificationsClass B Equipment Page Limited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty