Appendix A Setting Up Static IP Address

12.Enter the following numbers in the “Subnet mask” text box:

255.255.255.0

Do not include the periods; they are automatically entered.

13.Enter the following numbers in the “Default gateway” text box:

192.168.0.1

Do not include the periods; they are automatically entered.

14.Activate the “Use the following DNS server addresses” circle by clicking in it.

15.Enter the following numbers in the “Preferred DNS server” text box:

192.168.0.1

Do not include the periods; they are automatically entered.

16.Click OK. The “Internet Protocol (TCP/IP) Properties” window disappears.

17.In the “Local Area Connection Properties” window, click OK. The Local Area Connection Properties window disappears.

18.Click Close in the Local Area Connection Status window. The window disap- pears.

19.Close the Network and Dial-up Connections window by clicking on the “x” button at the upper right corner of the window.

The computer is now set up with a static IP address, allowing the user to access the Modem’s Advanced Setup utility.

47

Page 50
Image 50
Actiontec electronic R7000M user manual 192.168.0.1