Table 11-1 Control-panel messages (continued)
Control panel message | Description | Recommended action |
|
|
|
|
| or go to www.hp.com/support/LJM3027mfp |
|
| or www.hp.com/support/LJM3035mfp.) |
|
|
|
22 Embedded I/O buffer overflow To | Too much data was sent to the embedded | Touch OK to print the transferred data. (Some |
continue touch OK | HP Jetdirect print server. | data might be lost.) |
|
|
|
22 Parallel I/O buffer overflow To continue | Too much data was sent to the parallel port. | Touch OK to clear the error message. (Data |
touch OK |
| will be lost.) |
|
| Check for a loose cable connection, and be |
|
| sure to use a |
|
| HP parallel cables might be missing pin |
|
| connections or might otherwise not conform |
|
| to the |
|
| www.hp.com/support/LJM3027mfp or |
|
| www.hp.com/support/LJM3035mfp. |
|
|
|
22 USB I/O buffer overflow To continue | Too much data was sent to the USB buffer. | Touch OK to clear the error message. (Data |
touch OK |
| will be lost.) |
|
|
|
30.1.YY Scanner failure | An error has occurred in the scanner. | Turn the device off and then on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. (See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| support/LJM3027mfp or www.hp.com/ |
|
| support/LJM3035mfp.) |
|
|
|
40 Bad serial transmission To continue | A serial data error (parity, framing, or line | Touch OK to clear the error message. (Data |
touch OK | overrun) occurred as data was being sent by | will be lost.) |
| the computer. |
|
|
|
|
40 EIO <X> bad transmission To continue | The connection between the device and the | Touch OK to clear the error message and |
touch OK | EIO card in the specified slot has been | continue printing. |
| broken. |
|
|
|
|
40 Embedded I/O bad transmission To | A temporary printing error has occurred. | Turn the device off, and then turn the device |
continue touch OK |
| on. |
|
| If this message persists, contact an HP- |
|
| authorized service or support provider. See |
|
| the HP support flyer, or go to www.hp.com/ |
|
| support/LJM3027mfp or www.hp.com/ |
|
| support/LJM3035mfp. |
|
|
|
41.3 - Load tray <XX> To use another tray, | The specified tray does not contain the | Touch OK to use a tray that contains media |
touch OK | specified media size. | of the correct size. |
|
|
|
41.3 - Load tray <XX>: <Type>, <Size> | The specified tray is loaded with media that | Touch OK to display Tray <X> Size. |
| is longer or shorter in the feed direction than | Reconfigure the size in a tray so that the |
| the size configured for the tray. | device will use a tray that is loaded with the |
|
| size of media required for the print job. If the |
|
| message does not clear automatically from |
|
| the |
|
| and then turn the device on. |
41.X Error To continue touch OK | A temporary printing error occurred. |
Touch OK to clear the error. If the error is not cleared, turn the device off, and then turn the device on.
If this message persists, contact an HP- authorized service or support provider. (See the HP support flyer, or go to www.hp.com/
ENWW |