HP M3027/M3035 General Copy Scan Ahead, Behavior Disabled, Auto Print Interrupt Enabled, Dark

Table 2-15Device Behavior menu (continued)

Menu item	Sub-menu item	Sub-menu item	Values	Description
General Copy	Scan Ahead		Enabled (default)	Use this feature to turn on no-wait scanning.
Behavior			Disabled	With Scan Ahead enabled, the pages in the
				original document are scanned to disk and
				held until the device becomes available.
	Auto Print Interrupt		Enabled	When this feature is enabled, copy jobs can
			Disabled	interrupt print jobs that are set to print multiple
				copies.
				The copy job is inserted into the print queue
				at the end of one copy of the print job. After
				the copy job is complete, the device
				continues printing the remaining copies of the
				print job.
	Copy Interrupt		Enabled	When this feature is enabled, a copy job that
			Disabled	is currently printing can be interrupted when
				a new copy job is started. You are prompted
				to confirm that you want to interrupt the
				current job.
	Alternative		No (default)
	Letterhead Mode		Yes
General Print	Override A4/Letter		No	Use this feature to print on letter-size paper
Behavior			Yes (default)	when an A4 job is sent but no A4-size paper
				is loaded in the device (or to print on A4 paper
				when a letter-size job is sent but no letter-size
				paper is loaded). This option will also override
				A3 with ledger-size paper and ledger with A3-
				size paper.
	Manual Feed		Enabled	When this feature is enabled, the user can
			Disabled (default)	select manual feed from the control panel as
				the paper source for a job.
	Courier Font		Regular (default)	Use this feature to select which version of the
			Dark	Courier font you want to use.
	Wide A4		Enabled	Use this feature to change the printable area
			Disabled (default)	of A4-size paper. If you enable this option,
				eighty 10-pitch characters can be printed on
				a single line of A4 paper.
	Print PS Errors		Enabled	Use this feature to select whether a
			Disabled (default)	PostScript (PS) error page is printed when
				the device encounters a PS error.
	Print PDF Errors		Enabled	Use this feature to select whether a PDF error
			Disabled (default)	page is printed when the device encounters
				a PDF error.
	Personality		Auto (default)	Select the printer language that the device
			PCL	should use.
				Normally you should not change the
			PDF
				language. If you change the setting to a
			PS	specific language, the device does not
				automatically switch from one language to
				another unless specific software commands
				are sent to the device.

ENWW Use the Administration menu 41