Solve print-quality problems
This section helps you define
Print-quality problems associated with media
Some
●Use media that meets HP specifications. See Media considerations on page 58.
●The surface of the media is too smooth. Use media that meets HP specifications. See Media considerations on page 58.
●The moisture content is uneven, too high, or too low. Use media from a different source or from an unopened ream.
●Some areas of the media reject toner. Use media from a different source or from an unopened ream.
●The letterhead you are using is printed on rough media. Use a smoother, xerographic media. If this solves your problem, ask the supplier of your letterhead to use media that meets the specifications for this device. See Media considerations on page 58.
●The media is excessively rough. Use a smoother, xerographic media.
●The driver setting is incorrect. To change the media type setting, see Control print jobs on page 72.
●The media that you are using is too heavy for the media type setting that you selected, and the toner is not fusing to the media.
Print-quality problems associated with the environment
If the device is operating in excessively humid or dry conditions, verify that the printing environment is within specifications. See Operating environment on page 221.
Print-quality problems associated with jams
Make sure that all sheets are cleared from the paper path. See Clear jams on page 166.
●If the device recently jammed, print two to three pages to clean the device.
●If the sheets do not pass through the fuser and cause image defects on subsequent documents, print three pages to clean the device. If the problem persists, print and process a cleaning page. See Clean the device on page 140.
Image defect examples
Use the examples in this
178 Chapter 11 Problem solving | ENWW |
