
Table 2-11 Jetdirect menus (continued)
Menu item | Values and Description | ||
|
|
|
|
Link Speed |
|
| The link speed and communication mode of the print |
|
|
| server must match the network. The available settings |
|
|
| depend on the device and installed print server. Select |
|
|
| one of the following link configuration settings: |
|
|
| CAUTION: If you change the link setting, network |
|
|
| communications with the print server and network |
|
|
| device might be lost. |
|
|
| Auto (default): The print server uses |
|
|
| to configure itself with the highest link speed and |
|
|
| communication mode allowed. If |
|
|
| either 100TX HALF or 10TX HALF is set depending on |
|
|
| the detected link speed of the hub/switch port. (A |
|
|
| 1000T |
|
|
| 10T Half: 10 Mbps, |
|
|
| 10T Full: 10 Mbps, |
|
|
| 100TX Half: 100 Mbps, |
|
|
| 1000TX Full: 1000 Mbps, |
|
|
|
|
Print Protocols |
|
| Use this item to print a page that lists the configuration |
|
|
| of the following protocols: IPX/SPX, Novell NetWare, |
|
|
| AppleTalk, DLC/LLC. |
|
|
|
|
ENWW | Use the Administration menu 35 |