2.Open the plate, and then slowly pull the media out of the device. Be careful to not tear the media.

CAUTION: Avoid spilling loose toner. Use a dry, lint-free cloth, to clean any toner that might have fallen into the device. If loose toner falls into the device, it might cause temporary problems with print quality. Loose toner should clear from the paper path after a few pages are printed. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. (Hot water sets toner into fabric.)

3.Replace the print cartridge, and then close the front door.

If a jam message persists, there is still media in the device. Look for media in other locations.

Clear jams from the output-bin areas

NOTE: If media is jammed in the top output area, but most of the media is still inside the device, it is best to remove it through the rear door.

1.Open the rear output bin.

170 Chapter 11 Problem solving

ENWW

Page 182
Image 182
HP M3027/M3035 manual Clear jams from the output-bin areas