Accton Technology ES3552XA, ES3526XA Following example shows how to map Http traffic to CoS value

Priority Commands 4

map ip port (Interface Configuration)

This command set IP port priority (i.e., TCP/UDP port priority). Use the no form to remove a specific setting.

Syntax

map ip port port number cos cos-value no map ip port port-number

•port-number - 16-bit TCP/UDP port number.(Range 1-65535)

•cos-value - Class-of-Service value. (Range: 0-7)

Default Setting

None

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

•This command sets the IP port priority for all interfaces.

Example

The following example shows how to map HTTP traffic to CoS value 0:

Console(config)#interface ethernet 1/5

Console(config-if)#map ip port 80 cos 0

Console(config-if)#

map ip precedence (Global Configuration)

This command enables IP precedence mapping (i.e., IP Type of Service). Use the no form to disable IP precedence mapping.

Syntax

[no] map ip precedence

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

•The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

•IP Precedence and IP DSCP cannot both be enabled. Enabling one of these priority types will automatically disable the other type.

4-205